Quote:
Dear me, you couldn't have done it any worse if you'd tried.


What? Tried to fix things or piss Mark off?

Quote:
I would read Roger's page on building drives over 60G. Install V2 Final Developer on it (not 2.10). Install one drive, as master, do the build manually. Remove it and install the second drive as master, do the build manually again.


I did this without the manul build. I just used the 2 final builder image and obviously did them one at a time with each as master. Just ran the build twice on each drive. After the builds, there seemed to be music left on one or both but I was able to sync and deleted everything that was there with emplode.

Quote:
Jumper the second drive as slave and install the drives on the cable and sled.

Did that.

Quote:
Install your music on the disc using emplode.


Working on that. It goes slow...

Quote:
If you have more than about 60-70% fill of the disk, run the fids apps to do the sort, but READ THE FAQ FIRST.


Can't find fidsift in the FAQ... I read some threads on it.

Quote:
Then you can consider doing things like upgrade the kernel to HiJack.


I'll do that last I guess.