Mark,

I couldn't find any nearby yellow capacitor ends that had an open to the dsp reset pin.

Also, and i may have done something wrong, but soldering to the dsp reset pin and #8 leg of the temperature sensor gave the i2c error unable to get data and would not play music. Understand that i had previously reset the temperature sensor to work again as you have previously outlined and lifted leg #8 to only tie in with the dsp reset pin

Anyway, I set everything back and it all works - music and temperature - but it has been an arduous journey.

CAUTION: Be VERY careful of how the leg #8 is bent up and how it is twisted, it is not robust at all. You really need to know what you are doing. I broke mine off and had to build up a "solder wall" to reach from the pad to the nub that was left. Very tedious and hard to do. Thankfully, i have a temperature regulated soldering iron i got from radio shack that works really well (used 600 degrees as recommended by Mark).