#227333 - 16/07/2004 10:11
Memory boards
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
Hi.
OK. Here's the deal. I have a design for a memory upgrade board for Mk2/2A boards which (although I haven't yet built a prototype) I'm pretty sure will work quite nicely. After much thought, I was unable to come up with a good way of getting it above 64MB, but that should be sufficient for most people. I had hoped for 128MB, but it turns out to be pretty much undoable.
It would be possible to add other things as well, but after talking it over with Hugo we decided there wasn't all that much point. I had considered both 100mbit ethernet and USB host, but dumped them for various reasons:
1) the data rate from the USB host controllers suitable for use in this application are dreadful, according to Hugo, and the controllers consume enormous amount of idle bus cycles, thereby slowing things down.
2) for a number of reasons that have been thoroughly explored in past discussions, 100Mbit ethernet in this application wouldn't really achieve much that 10Mbit doesn't, and complicates things quite a lot.
3) There are supply problems with some of the parts for both USB and ethernet
4) It may well not fit anyway.
So, the current plan is for a PCB which will fit to the underside of the main board, attaching to the test points. It will have 8 64Mbit DRAM chips giving a total of 64MB of ram, and will require one patch wire. On a MK2A you could omit the wire and still get 48MB. On a MK2 you will have to remove the chips currently fitted to get the full amount.
It is a completely surface mount device, and would as such not really be suitable for selling as a kit. I will therefore have to get the things made in batches as completed sub-assemblies, which will then need to be fitted by one or other of the prople floating around who are good at such things.
I am provisionally aiming at a price of about £90-100, and the advantage of doing it this way should be shorter lead times and less supply problems than the tuner kits have. So far, I have contacted a company who can do the assembly, have routed the PCB, and I'm waiting for a quote on quantities of the RAM and on manufacture of the boards.
Anyone interested?
Pca
_________________________
Experience is what you get just after it would have helped...
|
|
Top
|
|
|
|
|
#227334 - 16/07/2004 10:26
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 29/08/2000
Posts: 14496
Loc: Canada
|
I'll take one!
Note about 100mb/s ethernet: with more memory, the underlying assumptions have changed, and it would now be able to have a more noticeable impact on I/O due to Linux's caching (which now has more memory to play with).
Cheers!
|
|
Top
|
|
|
|
|
#227335 - 16/07/2004 10:33
Re: Memory boards
[Re: pca]
|
enthusiast
Registered: 27/03/2002
Posts: 248
Loc: Swindon, UK
|
Drooooool. I'll take 2 please Patrick. And someone to install them 
_________________________
Andy
MK2a 60GB Amber 040103916 32mb/Light Kit
MK2a 50GB Amber 030102560 32mb
|
|
Top
|
|
|
|
|
#227336 - 16/07/2004 10:42
Re: Memory boards
[Re: pca]
|
pooh-bah
Registered: 12/01/2002
Posts: 2009
Loc: Brisbane, Australia
|
Yep, I'll take one.
Do you still have to remove the original chips for a Mk2a? I assume yes but you only mention that it's necessary for the Mk2 in your post. If not, the original chips are redundant, right?
And there is enough room underneath the PCB right? I don't remember huge amounts of space between the board and metal case but we are talking only one surface mount chip thickness plus PCB (~3mm?)
_________________________
Christian
#40104192 120Gb (no longer in my E36 M3, won't fit the E46 M3)
|
|
Top
|
|
|
|
|
#227337 - 16/07/2004 10:46
Re: Memory boards
[Re: skibum]
|
carpal tunnel
Registered: 15/08/2000
Posts: 4859
Loc: New Jersey, USA
|
I am, of course, interested. Four, please. But, a question: what does this do to people with enhanced memory via the stacking method? Does all of the memory need to be removed?
_________________________
Paul Grzelak
200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
|
|
Top
|
|
|
|
|
#227338 - 16/07/2004 10:52
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 18/01/2000
Posts: 5683
Loc: London, UK
|
I'll take two.
_________________________
-- roger
|
|
Top
|
|
|
|
|
#227339 - 16/07/2004 10:53
Re: Memory boards
[Re: Shonky]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
The board adds 4 identical banks of 16MB, and duplicates the bank0 set currently present on a MK2A. Obviously, this isn't going to work all that well. The idea is that each bank can be disabled by means of a switch on the memory board, so in the case of a MK2A you would turn off the first bank. This would still give you 64M, as the original memory would be used. As for room, there's a whole 2.5-3mm available! 0.8mm for the PCB, 1.2mm for the chips, 0.1mm for the insulator sheet on each side of the PCB, and loads of room left over  pca
_________________________
Experience is what you get just after it would have helped...
|
|
Top
|
|
|
|
|
#227340 - 16/07/2004 10:55
Re: Memory boards
[Re: pgrzelak]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
Well, if you've already butchered your poor board, you could disable the appropriate banks on the expansion board to compensate. I would recommend removing the added stacked chips, but it shouldn't be absolutely necessary. You would still only have 64MB though.
pca
_________________________
Experience is what you get just after it would have helped...
|
|
Top
|
|
|
|
|
#227341 - 16/07/2004 11:01
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 15/08/2000
Posts: 4859
Loc: New Jersey, USA
|
Ah, my board has been hacked a few times already - digital out, illumination hack. The memory was just the most recent. Still, if it is a matter of only gaining an extra 16MB over the existing 48, it may not be practical. Still, I would like to get the boards anyway, just in case I run into trouble later on. 
_________________________
Paul Grzelak
200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
|
|
Top
|
|
|
|
#227342 - 16/07/2004 11:12
Re: Memory boards
[Re: pca]
|
enthusiast
Registered: 16/02/2001
Posts: 373
Loc: Switzerland
|
|
|
Top
|
|
|
|
|
#227343 - 16/07/2004 11:19
Re: Memory boards
[Re: pca]
|
member
Registered: 28/08/2003
Posts: 149
Loc: Isle of Wight, UK
|
I'll take one, please Sir.
_________________________
Steve
|
|
Top
|
|
|
|
|
#227344 - 16/07/2004 11:23
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 30/10/2000
Posts: 4931
Loc: New Jersey, USA
|
I'm probably in for two or three at least.
_________________________
-Rob Riccardelli
80GB 16MB MK2 090000736
|
|
Top
|
|
|
|
|
#227345 - 16/07/2004 11:33
Re: Memory boards
[Re: pca]
|
member
Registered: 12/08/2001
Posts: 175
Loc: Atlanta
|
I'll take two of the boards.
|
|
Top
|
|
|
|
|
#227346 - 16/07/2004 11:51
Re: Memory boards
[Re: pca]
|
member
Registered: 29/08/2000
Posts: 153
Loc: Berkshire, UK
|
I'll take one as well, thanks!
_________________________
Bryan.
|
|
Top
|
|
|
|
|
#227347 - 16/07/2004 11:58
Re: Memory boards
[Re: pca]
|
addict
Registered: 01/03/2002
Posts: 599
Loc: Florida
|
|
|
Top
|
|
|
|
|
#227348 - 16/07/2004 12:11
Re: Memory boards
[Re: pca]
|
old hand
Registered: 15/07/2002
Posts: 828
Loc: Texas, USA
|
|
|
Top
|
|
|
|
|
#227349 - 16/07/2004 12:20
Re: Memory boards
[Re: pca]
|
addict
Registered: 11/11/2001
Posts: 552
Loc: Houston, TX
|
Count me in for 2.
_________________________
--Ben
78GB MkIIa, Dead tuner.
|
|
Top
|
|
|
|
|
#227350 - 16/07/2004 12:31
Re: Memory boards
[Re: BAKup]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
OK, so it looks like my initial test batch of 25 is gone already! I may have to do a bigger initial set.
I have heard back from the memory supplier, and the chips are in stock and rather cheaper than I feared. So that's all right then.
Just the PCB to go now.
pca
_________________________
Experience is what you get just after it would have helped...
|
|
Top
|
|
|
|
|
#227351 - 16/07/2004 12:33
Re: Memory boards
[Re: pca]
|
member
Registered: 12/08/2002
Posts: 179
Loc: Manchester, NH
|
I'll take one. I will have the person that repaired my other chips (many times) do the surface mount soldering for me.
|
|
Top
|
|
|
|
|
#227352 - 16/07/2004 12:41
Re: Memory boards
[Re: pca]
|
journeyman
Registered: 02/07/2004
Posts: 95
Loc: 384400 km from the Moon
|
It really sounds much better than stacking and having 6->3 patch wires dangling around.
Count me in for one of those.
|
|
Top
|
|
|
|
|
#227353 - 16/07/2004 12:52
Re: Memory boards
[Re: pca]
|
addict
Registered: 13/06/2000
Posts: 429
Loc: Berlin, DE
|
I'm very much interested, I have an original MK2 player.
_________________________
80gig red mk2 -- 080000125
(No, I don't actually hate Alan Cox)
|
|
Top
|
|
|
|
|
#227354 - 16/07/2004 13:34
Re: Memory boards
[Re: pca]
|
member
Registered: 06/06/2001
Posts: 183
|
|
|
Top
|
|
|
|
|
#227355 - 16/07/2004 13:35
Re: Memory boards
[Re: pca]
|
journeyman
Registered: 28/02/2003
Posts: 50
Loc: Switzerland
|
|
|
Top
|
|
|
|
|
#227356 - 16/07/2004 13:37
Re: Memory boards
[Re: Chuck]
|
carpal tunnel
Registered: 17/01/2002
Posts: 3996
Loc: Manchester UK
|
Hmm, a hundred quid for another 32MB of memory. Takes me back ten years! For that sort of price I would struggle to justify it to myself... (Says the man who's just dropped £100 on new headphones )
_________________________
Cheers,
Andy M
|
|
Top
|
|
|
|
|
#227357 - 16/07/2004 14:14
Re: Memory boards
[Re: pca]
|
new poster
Registered: 21/09/2000
Posts: 40
|
count me in for one as well, thank you :-)
i've got a MK2 in case you need to know that as well.
greg
Edited by gogee2000 (16/07/2004 14:15)
|
|
Top
|
|
|
|
|
#227358 - 16/07/2004 14:23
Re: Memory boards
[Re: pca]
|
member
Registered: 17/12/2001
Posts: 194
|
Count me in for one as well.
_________________________
Dave
MK2 12Gb
MK2a 60Gb
|
|
Top
|
|
|
|
#227360 - 16/07/2004 14:51
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 25/06/1999
Posts: 2993
Loc: Wareham, Dorset, UK
|
Need you ask? I'll take two, and I'm prepared to install/test them also.
_________________________
One of the few remaining Mk1 owners...  #00015
|
|
Top
|
|
|
|
#227361 - 16/07/2004 14:54
Re: Memory boards
[Re: genixia]
|
carpal tunnel
Registered: 25/06/1999
Posts: 2993
Loc: Wareham, Dorset, UK
|
You have to know Patrick....
_________________________
One of the few remaining Mk1 owners... #00015
|
|
Top
|
|
|
|
|
#227362 - 16/07/2004 14:58
Re: Memory boards
[Re: schofiel]
|
Carpal Tunnel
Registered: 08/02/2002
Posts: 3411
|
I guess he's protective of his babies. I wonder how he'll feel when I completely disassemble a Mk1 mainboard.
_________________________
Mk2a 60GB Blue. Serial 030102962
sig.mp3: File Format not Valid.
|
|
Top
|
|
|
|
|
#227363 - 16/07/2004 15:00
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 24/12/2001
Posts: 5528
|
Dibs on 2
|
|
Top
|
|
|
|
|
#227364 - 16/07/2004 15:01
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 05/01/2001
Posts: 4903
Loc: Detroit, MI USA
|
I'll take two please.
Could we look into shipping a mass order to someone in the US and then distributing from there to save on shipping? Possibly to someone in the States who could also offer installs?
_________________________
Brad B.
|
|
Top
|
|
|
|
|
#227365 - 16/07/2004 15:06
Re: Memory boards
[Re: SE_Sport_Driver]
|
carpal tunnel
Registered: 17/01/2002
Posts: 3996
Loc: Manchester UK
|
Quote:
Possibly to someone in the States who could also offer installs?
I'm sure Eutronix Stu will be on the case.
_________________________
Cheers,
Andy M
|
|
Top
|
|
|
|
|
#227366 - 16/07/2004 15:08
Re: Memory boards
[Re: andym]
|
Carpal Tunnel
Registered: 08/02/2002
Posts: 3411
|
I might too. I've got to finish up some other stuff first though.
_________________________
Mk2a 60GB Blue. Serial 030102962
sig.mp3: File Format not Valid.
|
|
Top
|
|
|
|
|
#227367 - 16/07/2004 15:10
Re: Memory boards
[Re: genixia]
|
journeyman
Registered: 22/05/2004
Posts: 50
|
You can count me in for 1 please
_________________________
Mk2a 64mb 60gb
|
|
Top
|
|
|
|
|
#227368 - 16/07/2004 15:11
Re: Memory boards
[Re: pca]
|
pooh-bah
Registered: 02/06/2000
Posts: 1996
Loc: Gothenburg, Sweden
|
Definately 1, possibly 2...
_________________________
/Michael
|
|
Top
|
|
|
|
|
#227369 - 16/07/2004 15:13
Re: Memory boards
[Re: andym]
|
carpal tunnel
Registered: 23/08/2000
Posts: 3826
Loc: SLC, UT, USA
|
Wow. It amazes me that so many of us are willing to spend close to 200 bucks on a small RAM upgrade. Maybe i'm missing the huge benefit here, but that's a chunk of change. Someone fill me in... why? Surely it can't be to save drive spinups for wear and tear... a new drive costs less.
Oh, and standard disclaimer applies... i'm not dissing the product since well... as we all know Patrick is THE MAN. Just trying to grok it. I want it but i don't know why. heheh.
|
|
Top
|
|
|
|
|
#227370 - 16/07/2004 15:18
Re: Memory boards
[Re: loren]
|
journeyman
Registered: 02/07/2004
Posts: 95
Loc: 384400 km from the Moon
|
Quoting famous Jeep motto: It's a GEEK thing, you wouldn't understand... Disclamer: no pun intended
|
|
Top
|
|
|
|
|
#227371 - 16/07/2004 15:32
Re: Memory boards
[Re: loren]
|
carpal tunnel
Registered: 29/08/2000
Posts: 14496
Loc: Canada
|
I'm going to run an internet web server from it.. need the extra memory for NFS/Apache.
Cheers
|
|
Top
|
|
|
|
|
#227372 - 16/07/2004 16:00
Re: Memory boards
[Re: genixia]
|
enthusiast
Registered: 27/03/2002
Posts: 248
Loc: Swindon, UK
|
Don't know. But he'll put it back together in 2 hours
_________________________
Andy
MK2a 60GB Amber 040103916 32mb/Light Kit
MK2a 50GB Amber 030102560 32mb
|
|
Top
|
|
|
|
|
#227373 - 16/07/2004 16:26
Re: Memory boards
[Re: loren]
|
pooh-bah
Registered: 31/08/1999
Posts: 1649
Loc: San Carlos, CA
|
Quote:
It amazes me that so many of us are willing to spend close to 200 bucks on a small RAM upgrade.
Agreed, the price seems a little steep compared the the "stack the chips" method, particularly if you don't really feel the need to go beyond 32Megs. What are the advantages of this method? Will these boards be any easier to install? Why are so many people who already have memory upgraded empegs so excited by this?
Of course, I'm probably in for one board myself since I would like some additional memory and it looks like this is going to quickly become the standard way to do it.
-Mike
|
|
Top
|
|
|
|
|
#227374 - 16/07/2004 16:27
Re: Memory boards
[Re: andym]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
But you don't have to justify it, just buy it pca
_________________________
Experience is what you get just after it would have helped...
|
|
Top
|
|
|
|
|
#227375 - 16/07/2004 16:29
Re: Memory boards
[Re: genixia]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
Don't worry, I'm not all that protective. I do after all have a MK2A motherboard here on the desk being used as a power supply Neatly, of course... pca
_________________________
Experience is what you get just after it would have helped...
|
|
Top
|
|
|
|
|
#227376 - 16/07/2004 16:31
Re: Memory boards
[Re: mcomb]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
What are the advantages of this method?
Primarily, reliability. In an automotive application, vibration will remove patch wires eventually, unless you use a LOT of glue. Plus it will be quicker to assemble and if necessary debug.
pca
_________________________
Experience is what you get just after it would have helped...
|
|
Top
|
|
|
|
|
#227377 - 16/07/2004 16:32
Re: Memory boards
[Re: SE_Sport_Driver]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
Could we look into shipping a mass order to someone in the US and then distributing from there to save on shipping?
I'm planning on arranging to have a local 'distributor' to do exactly this, on various continents. It will make a lot of things much simpler. I just haven't had a chance to contact the various suspects yet.
pca
_________________________
Experience is what you get just after it would have helped...
|
|
Top
|
|
|
|
|
#227378 - 16/07/2004 16:45
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 30/10/2000
Posts: 4931
Loc: New Jersey, USA
|
We have a full shipping facility here. UPS and FedEx make daily pickups.
_________________________
-Rob Riccardelli
80GB 16MB MK2 090000736
|
|
Top
|
|
|
|
|
#227379 - 16/07/2004 17:11
Re: Memory boards
[Re: pca]
|
Carpal Tunnel
Registered: 08/02/2002
Posts: 3411
|
Quote:
Quote:
What are the advantages of this method?
Primarily, reliability. In an automotive application, vibration will remove patch wires eventually, unless you use a LOT of glue. Plus it will be quicker to assemble and if necessary debug.
Getting to 48MB the other way is difficult, and getting to 64MB incredibly so. 64MB also requires some creativity to deal with the limited clearance between the memory and IDE cable. I raised my drive tray, and peakmop separated his IDE cable so he could move it out of the way. Neither of those measures could be described as routine. Whilst I'm not too concerned with reliability issues for the players that I've done (lots of glue, heh!), the new method should be a much better way to do it.
I'd point out that the 'old' way is still going to be a cost effective 32MB upgrade (~$80 installed) for those who can't justify the (estimated) $240 installed cost of the new 64MB upgrade. Paul still has chips available for those who chose that route. (And it shouldn't preclude an eventual 64 upgrade either).
For anyone questioning the cost of this new method, a 64MB upgrade done the old way would end up costing about the same anyway, ( 3 * $30 chips) + ( 3 * $50 installs) = $240.
_________________________
Mk2a 60GB Blue. Serial 030102962
sig.mp3: File Format not Valid.
|
|
Top
|
|
|
|
|
#227380 - 16/07/2004 17:53
Re: Memory boards
[Re: pca]
|
addict
Registered: 29/06/2002
Posts: 531
Loc: Triangle, VA
|
Could we use the memory we already have for the empeg? cause I already have a bunch of memory chips for my empeg. But am very interested in this either way.
_________________________
-D
Modifying and Tweaking is a journey,
not a destination................................
MKIIa : 60gig - 040103286 - Blue - v2 + PCATS tuner
MKIIa : 20gig - 040103260 - Blue - v3a8 + Mark Lord Special Edition Cherry Dock
|
|
Top
|
|
|
|
|
#227381 - 16/07/2004 18:38
Re: Memory boards
[Re: pca]
|
old hand
Registered: 12/01/2000
Posts: 1079
Loc: Dallas, TX
|
|
|
Top
|
|
|
|
|
#227382 - 16/07/2004 19:32
Re: Memory boards
[Re: pca]
|
pooh-bah
Registered: 16/06/2000
Posts: 1682
Loc: Greenhills, Ohio
|
Yep, count me in for 2.
_________________________
Laura
MKI #017/90
whatever
|
|
Top
|
|
|
|
|
#227383 - 16/07/2004 19:34
Re: Memory boards
[Re: mcomb]
|
carpal tunnel
Registered: 29/08/2000
Posts: 14496
Loc: Canada
|
My own plan is to get one of these upgrade boards from Patrick, and then find some willing bloke to send me their player so I can install it and test Hijack on it -- making any Hijack changes as required to get it all nicely supported. And then to return the upgraded player to whomever loaned it. They pay for the parts, but not for the actual installation.
For my own players, I'm sticking with one set (16MB) of stacked add-on memory. I'm not wealthy enough to actually install the 64MB kits onto all of my own players!
Cheers
|
|
Top
|
|
|
|
|
#227385 - 16/07/2004 20:09
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 08/06/1999
Posts: 7868
|
I'm up for one kit.
And Loren, more memory also allows use of larger music databases. Think of it this way, in theory, a 100 gig player filled with typical music would have a database 5 times larger then a 20 gig player. Thus, less cache. Bu upgrading to 32, or 64, you return the player to a state where it has plenty of cache room, and also has enough memory to do the database rebuilds. It was discussed at the meet that database rebuilds don't currently enable swap, leading to some of the crash issues in 3.0 alpha on database rebuilds, due to the memory overhead of the player app running.
|
|
Top
|
|
|
|
|
#227386 - 16/07/2004 20:13
Re: Memory boards
[Re: loren]
|
carpal tunnel
Registered: 29/08/2000
Posts: 14496
Loc: Canada
|
Well, once units with 32MB or more become common, I fully intend on adding some major new functionality to the hijack kernels. The kinds of stuff I've held off in the past due to memory consumption.
You know.. like vertical playlist menus.. NFS server (just a kernel config option), etc..
Cheers
|
|
Top
|
|
|
|
#227387 - 16/07/2004 20:31
Re: Memory boards
[Re: mlord]
|
addict
Registered: 27/02/2001
Posts: 569
Loc: Albany, NY
|
I volunteer my unit if you want Mark. It's been out of my car recently and sitting in the house. Need to tighten up the mounting a little but much too busy at the moment. It has Ver 2 software but if you want to use it feel free to install any version you want. Just let me know what you want to do. (This means I'm in for one board )
|
|
Top
|
|
|
|
|
#227388 - 16/07/2004 21:34
Re: Memory boards
[Re: mlord]
|
carpal tunnel
Registered: 23/08/2000
Posts: 3826
Loc: SLC, UT, USA
|
Quote:
You know.. like vertical playlist menus.
SOLD! haha.
|
|
Top
|
|
|
|
|
#227389 - 16/07/2004 23:08
Re: Memory boards
[Re: loren]
|
carpal tunnel
Registered: 05/01/2001
Posts: 4903
Loc: Detroit, MI USA
|
If I play my root playlist on my Rio, it won't remember it between reboots. My empeg (mk2) won't even play the root playlist in the first place. I'm hoping that more RAM will help this. Either way, database rebuilds are painful. Mark has mentioned the web server stuff will be faster, and I've been getting more use out of that as well. Hard drives are cheaper, but data is priceless. 
_________________________
Brad B.
|
|
Top
|
|
|
|
|
#227390 - 16/07/2004 23:23
Re: Memory boards
[Re: SE_Sport_Driver]
|
carpal tunnel
Registered: 24/12/2001
Posts: 5528
|
Isn't the can't remember the playlist problem to do with lack of space in the dynamic data partition? The space reserved for the current playlist has a hard limit. Extra RAM won't help in this case. You'll need to get the empeg guys to see about modifying the format of the dynamic data partition.
|
|
Top
|
|
|
|
|
#227391 - 16/07/2004 23:27
Re: Memory boards
[Re: tman]
|
Carpal Tunnel
Registered: 08/02/2002
Posts: 3411
|
Quote:
Isn't the can't remember the playlist problem to do with lack of space in the dynamic data partition?
I believe that it is. Certainly Paul's players don't remember a large running order over a reboot, even with 48MB RAM.
_________________________
Mk2a 60GB Blue. Serial 030102962
sig.mp3: File Format not Valid.
|
|
Top
|
|
|
|
|
#227392 - 16/07/2004 23:28
Re: Memory boards
[Re: pca]
|
new poster
Registered: 03/01/2002
Posts: 24
Loc: Skövde, Sweden
|
Need any more response? I want one!
|
|
Top
|
|
|
|
|
#227393 - 16/07/2004 23:29
Re: Memory boards
[Re: genixia]
|
carpal tunnel
Registered: 05/01/2001
Posts: 4903
Loc: Detroit, MI USA
|
Ah, okay. My bad.
_________________________
Brad B.
|
|
Top
|
|
|
|
|
#227394 - 17/07/2004 00:22
Re: Memory boards (more data - more time)
[Re: SE_Sport_Driver]
|
journeyman
Registered: 02/07/2004
Posts: 95
Loc: 384400 km from the Moon
|
Quote:
Hard drives are cheaper, but data is priceless.
Have you ever considered how much time it will take to listen to all of the stuff we are trying to cram onto our empegs' hard drives?
Quick math:
1 min. worth of MP3 song at a descent cbr of 192 Kbps - roughly 1.4 MB. Given the largest currently available empeg space - 160 GB, say 155 GB (158720 MB) of which is usable, there are approximately 113371 min. That's 78.7 days or 2.6 months!
|
|
Top
|
|
|
|
|
#227395 - 17/07/2004 00:44
Re: Memory boards
[Re: pca]
|
member
Registered: 09/03/2003
Posts: 121
Loc: Iowa
|
I would be interested in 2.
|
|
Top
|
|
|
|
|
#227396 - 17/07/2004 01:02
Re: Memory boards
[Re: Gleep]
|
carpal tunnel
Registered: 17/12/2000
Posts: 2665
Loc: Manteca, California
|
I want one as well.
_________________________
Glenn
|
|
Top
|
|
|
|
|
#227397 - 17/07/2004 01:17
Re: Memory boards (more data - more time)
[Re: peakmop]
|
carpal tunnel
Registered: 05/01/2001
Posts: 4903
Loc: Detroit, MI USA
|
I actually joke about that all the time to my friends. I've never done the math and assumed it was more than that. I remember when I got my first 12GB player, I used to joke that I could drive to and from California a few times without hearing the same song twice - now I could do more than that! The point isn't having "hours" of music but rather having the means to hear "what you want, when you want." This is very true when DJing, so I can meet requests, but it's also great when driving around town. I say to my passangers, "What do you want to hear?" Someone who hasn't ridden with me might reply, "What do you have?" To which I'll repeat, "No. What do you want to hear?" Of course, even with my 140gb, I still get stumped all the time!
_________________________
Brad B.
|
|
Top
|
|
|
|
|
#227398 - 17/07/2004 01:59
Re: Memory boards
[Re: mlord]
|
pooh-bah
Registered: 16/06/2000
Posts: 1682
Loc: Greenhills, Ohio
|
Put me down as a second volunteer if you need one. My player also needs to have the IDE header soldered, it's pretty much useless at the moment.
_________________________
Laura
MKI #017/90
whatever
|
|
Top
|
|
|
|
|
#227399 - 17/07/2004 02:39
Re: Memory boards
[Re: pca]
|
old hand
Registered: 28/04/2002
Posts: 770
Loc: Los Angeles, CA
|
|
|
Top
|
|
|
|
|
#227400 - 17/07/2004 03:00
Re: Memory boards
[Re: loren]
|
pooh-bah
Registered: 19/09/2002
Posts: 2494
Loc: East Coast, USA
|
Quote:
You know.. like vertical playlist menus.
SOLD! haha.
Haha, NICE! Hm, that might actually sell me too, though I'm hesitant to "butcher" my player if I don't need to.
Mark, would you plan to release "low mem" and "high mem" versions of HiJack for us poor 16meg folks in the future?
::shudders:: But, what if Mark doesn't offer low mem version? And what if Patrick's memory board goes out of production? I'll be stranded at 16 meg, software will be incompatible, my database size will be too big, and ALL that. Oh man, the threat of empeg add-ons going out of production is SO strong....
_________________________
- FireFox31 110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set
|
|
Top
|
|
|
|
|
#227401 - 17/07/2004 03:04
Re: Memory boards
[Re: pca]
|
pooh-bah
Registered: 19/09/2002
Posts: 2494
Loc: East Coast, USA
|
You know what, put me down for one also. I'll keep my spare player as a pristine example of empeg's genius. But I'll jack up my main player with all the goodies. And besides, it's by Patrick. And if it goes out of production and I miss my chance at it, I'll KICK myself.
Edited by FireFox31 (17/07/2004 03:09)
_________________________
- FireFox31 110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set
|
|
Top
|
|
|
|
|
#227402 - 17/07/2004 03:27
Re: Memory boards
[Re: pca]
|
enthusiast
Registered: 11/06/2003
Posts: 384
|
I'm in for at least one!
--Nathan
|
|
Top
|
|
|
|
|
#227403 - 17/07/2004 04:06
Re: Memory boards
[Re: pca]
|
old hand
Registered: 23/07/2003
Posts: 869
Loc: Colorado
|
I'd be interested in one as well, Patrick.
_________________________
Dave
|
|
Top
|
|
|
|
|
#227404 - 17/07/2004 04:30
Re: Memory boards
[Re: webroach]
|
new poster
Registered: 04/01/2004
Posts: 14
|
so how much is that in $US?
|
|
Top
|
|
|
|
|
#227405 - 17/07/2004 04:32
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 20/05/2001
Posts: 2616
Loc: Bruges, Belgium
|
I'm in for one, possibly two.
_________________________
Riocar 80gig S/N : 010101580 red
Riocar 80gig (010102106) - backup
|
|
Top
|
|
|
|
|
#227406 - 17/07/2004 04:48
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 24/01/2002
Posts: 3937
Loc: Providence, RI
|
|
|
Top
|
|
|
|
|
#227407 - 17/07/2004 07:04
Re: Memory boards
[Re: jerryfreak2]
|
old hand
Registered: 23/07/2003
Posts: 869
Loc: Colorado
|
_________________________
Dave
|
|
Top
|
|
|
|
|
#227408 - 17/07/2004 09:53
Re: Memory boards
[Re: pca]
|
addict
Registered: 16/08/1999
Posts: 453
Loc: NRW, Germany
|
Hi Patrick, I'll take one as well, of course
_________________________
(list 6284, Mk1 S/N 00299 4GB blue [sold]. Mk2 S/N 080000094 20GB blue)
|
|
Top
|
|
|
|
|
#227409 - 17/07/2004 11:28
Re: Memory boards
[Re: FireFox31]
|
carpal tunnel
Registered: 29/08/2000
Posts: 14496
Loc: Canada
|
Quote:
Mark, would you plan to release "low mem" and "high mem" versions of HiJack for us poor 16meg folks in the future?
Well, I dunno. Hijack is just mostly stuff I do for my own use, and I make it available to the rest of us just because that way it gets tested more thoroughly!
Mmm..
|
|
Top
|
|
|
|
|
#227410 - 17/07/2004 11:40
Re: Memory boards
[Re: pca]
|
enthusiast
Registered: 11/01/2002
Posts: 211
Loc: Qc, Canada
|
Count me in for 1 board
_________________________
Patrick
|
|
Top
|
|
|
|
|
#227411 - 17/07/2004 13:40
Re: Memory boards
[Re: pca]
|
pooh-bah
Registered: 25/08/2000
Posts: 2413
Loc: NH USA
|
I'd be in for two. How did I miss this thread?
-Zeke
_________________________
WWFSMD?
|
|
Top
|
|
|
|
|
#227413 - 17/07/2004 22:12
Re: Memory boards
[Re: pca]
|
enthusiast
Registered: 10/01/2002
Posts: 362
|
I want two,and someone to install them
_________________________
040103958 60g
|
|
Top
|
|
|
|
|
#227414 - 17/07/2004 22:28
Re: Memory boards
[Re: pca]
|
addict
Registered: 08/08/2001
Posts: 452
Loc: NZ
|
I'd be interested in one, however I am in New Zealand, can I send the board to someone for install? How hard is the install i.e. number of solder points? I have soldered a few modchips to playstation2's..
|
|
Top
|
|
|
|
|
#227415 - 18/07/2004 09:02
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 10/06/1999
Posts: 5916
Loc: Wivenhoe, Essex, UK
|
Two please.
_________________________
Remind me to change my signature to something more interesting someday
|
|
Top
|
|
|
|
|
#227416 - 18/07/2004 12:03
Re: Memory boards
[Re: pca]
|
addict
Registered: 30/05/2002
Posts: 695
|
Somehow I passed over this thread as well. I was planning to find someone to perform the "old" method upgrade to my player, but since that's not done yet...
I would definitely be interested in one. And of course if someone offers to install it, that would be wonderful.
|
|
Top
|
|
|
|
|
#227417 - 18/07/2004 19:59
Re: Memory boards
[Re: pca]
|
old hand
Registered: 16/02/2002
Posts: 867
Loc: Oxford, UK
|
|
|
Top
|
|
|
|
|
#227418 - 19/07/2004 08:37
Re: Memory boards
[Re: AndrewT]
|
journeyman
Registered: 16/11/2001
Posts: 74
Loc: Utrecht, Netherlands
|
Well.. Even I would like to have some extra memory, so: PCA: you can count me in too for 1 set. Isn't easier to setup a web-site to take the orders there (like you did with the tuners). Its a hard time to count all request here
|
|
Top
|
|
|
|
|
#227420 - 19/07/2004 11:49
Re: Memory boards
[Re: pca]
|
enthusiast
Registered: 12/05/2002
Posts: 205
Loc: Virginia, USA
|
This is great! I'd like one. Also, is there a chance that we could see pictured of this board. I'm curious to see how it mounts and what it looks like.
_________________________
Brent
RioCar MK][a 20GB+80GB
'96 Saab 900s (Not any more)
Still looking for a good way to install in a 2010 BMW 3 series with iDrive/NAV
|
|
Top
|
|
|
|
|
#227421 - 19/07/2004 12:00
Re: Memory boards
[Re: tman]
|
carpal tunnel
Registered: 05/01/2001
Posts: 4903
Loc: Detroit, MI USA
|
Quote:
Isn't the can't remember the playlist problem to do with lack of space in the dynamic data partition? The space reserved for the current playlist has a hard limit. Extra RAM won't help in this case. You'll need to get the empeg guys to see about modifying the format of the dynamic data partition.
I noticed my 12mb empeg can not even play the root playlist whereas my 16mb RioCar can (but will not remember it through reboots). So I guess the dynamic data partition is used to store info between reboots and must be smaller than the 16mb used by the RioCar to load the playlist during operation? How hard would it be to get a larger data partition from the Build Brothers?
// I imagine a larger initial order will hopefully bring the price down?
_________________________
Brad B.
|
|
Top
|
|
|
|
|
#227422 - 19/07/2004 12:18
Re: Memory boards
[Re: pca]
|
old hand
Registered: 27/02/2003
Posts: 777
Loc: Washington, DC metro
|
/. Me too! //.
Way cool!
-jk
|
|
Top
|
|
|
|
|
#227423 - 19/07/2004 12:27
Re: Memory boards
[Re: SE_Sport_Driver]
|
carpal tunnel
Registered: 13/07/2000
Posts: 4180
Loc: Cambridge, England
|
Quote:
So I guess the dynamic data partition is used to store info between reboots and must be smaller than the 16mb used by the RioCar to load the playlist during operation? How hard would it be to get a larger data partition from the Build Brothers?
Repartitioning disks without hosing content is reasonably hard. But the use made of the dynamic data partition isn't very efficient, so we could rearrange it to give more of its space to saved running-order. In fact, we've been threatening to do this for the whole of the v3 era, and it wouldn't surprise me if I'd threatened to do it for v2 final. But I just haven't got round to it.
Without a lot of work (which isn't going to happen) to v2, such a rearrangement would completely bork anyone who switched back from v3 to v2.
Edit: Well, I say "completely" bork; it'd bork their bookmarks and play counts. Whether that counts as complete borkage depends on one's individual bork threshold.
Peter
|
|
Top
|
|
|
|
|
#227424 - 19/07/2004 13:30
Re: Memory boards
[Re: peter]
|
carpal tunnel
Registered: 18/01/2000
Posts: 5683
Loc: London, UK
|
Quote:
Repartitioning disks without hosing content is reasonably hard.
But if one was prepared to hose one's content, could one just make the dynamic data partition larger? Would the player use the extra? I don't remember.
_________________________
-- roger
|
|
Top
|
|
|
|
|
#227425 - 19/07/2004 13:32
Re: Memory boards
[Re: Roger]
|
carpal tunnel
Registered: 15/08/2000
Posts: 4859
Loc: New Jersey, USA
|
Or if one was starting with a fresh set of drives... Say, 100GB drives for example...
_________________________
Paul Grzelak
200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
|
|
Top
|
|
|
|
|
#227426 - 19/07/2004 13:39
Re: Memory boards
[Re: Roger]
|
carpal tunnel
Registered: 13/07/2000
Posts: 4180
Loc: Cambridge, England
|
Quote:
But if one was prepared to hose one's content, could one just make the dynamic data partition larger? Would the player use the extra? I don't remember.
Not at present, no. And the stored running-order comes at the beginning, not the end; changing the code to stat the partition to find the endstop would solve the 28K limit on total fids but not the limit on stored running-order sizes.
Peter
|
|
Top
|
|
|
|
|
#227427 - 19/07/2004 14:43
Re: Memory boards
[Re: peter]
|
enthusiast
Registered: 27/03/2002
Posts: 248
Loc: Swindon, UK
|
Surely changing the code to use only the bytes it needs, rather than all 512 would be a good idea as well. Doesn't each entry only use 32 or 64 bytes (can't remember which).
_________________________
Andy
MK2a 60GB Amber 040103916 32mb/Light Kit
MK2a 50GB Amber 030102560 32mb
|
|
Top
|
|
|
|
|
#227428 - 19/07/2004 14:48
Re: Memory boards
[Re: skibum]
|
carpal tunnel
Registered: 13/07/2000
Posts: 4180
Loc: Cambridge, England
|
Quote:
Surely changing the code to use only the bytes it needs, rather than all 512 would be a good idea as well. Doesn't each entry only use 32 or 64 bytes (can't remember which).
It's certainly not very much, but the point of using 512 is that it's one sector and can be written atomically; that is, screwing up a write (due to powerfail) can only affect one track's information, not all its neighbours too. But yes, this consideration is probably not worth it, compared to the problems people are having with >256K running-orders. Reducing the FID-dynamic data space and handing the free space over to running-order storage is exactly the plan for, er, sometime in v3.
Peter
|
|
Top
|
|
|
|
|
#227429 - 19/07/2004 15:16
Re: Memory boards
[Re: pca]
|
journeyman
Registered: 08/08/2001
Posts: 51
Loc: CA, USA
|
I want one too!
(BBS admin: add a $ sign post icon, it would make "me too" threads easier to read when we're buying stuff... maybe...)
_________________________
Ryan here... Empeg [08000462] 40 Gig with Subaru WRX sport wagon attached... (still! pending memory + LED upgrade, sheesh, I've been sitting on my ass for years)
|
|
Top
|
|
|
|
|
#227430 - 19/07/2004 15:38
Re: Memory boards
[Re: peter]
|
carpal tunnel
Registered: 29/08/2000
Posts: 14496
Loc: Canada
|
Quote:
It's certainly not very much, but the point of using 512 is that it's one sector and can be written atomically
Actually, that has not been true for most of the past decade or so.. Internally, most IDE drives will rewrite the entire physical track, or a large portion of it, when "rewriting just one sector".
Cheers
Edited by mlord (19/07/2004 15:39)
|
|
Top
|
|
|
|
|
#227432 - 21/07/2004 02:35
Re: Memory boards
[Re: genixia]
|
carpal tunnel
Registered: 13/02/2002
Posts: 3212
Loc: Portland, OR
|
How about Head Honcho Red Coloured Name guy? (ObOnTopic: Me too. Not that I need the RAM, yet -- I just like having a car stereo that's more powerful than my desktop computers.)
|
|
Top
|
|
|
|
|
#227433 - 21/07/2004 03:50
Re: Memory boards
[Re: canuckInOR]
|
journeyman
Registered: 02/07/2004
Posts: 95
Loc: 384400 km from the Moon
|
Quote:
I just like having a car stereo that's more powerful than my desktop computers.)
Here's a thought - since we are on the memory redesign, how about CPU - is it conceivable to upgrade to, say PXA255 XScale 400MHz? Then something crazy like video-4-empeg would be within reach
|
|
Top
|
|
|
|
|
#227434 - 21/07/2004 05:24
Re: Memory boards
[Re: peakmop]
|
carpal tunnel
Registered: 10/06/1999
Posts: 5916
Loc: Wivenhoe, Essex, UK
|
400Mhz ? Even my Pocket PC has a faster XScale than that My 624Mhz Pocket PC is the second fastest processor I own...
_________________________
Remind me to change my signature to something more interesting someday
|
|
Top
|
|
|
|
|
#227435 - 21/07/2004 11:28
Re: Memory boards
[Re: peakmop]
|
carpal tunnel
Registered: 24/12/2001
Posts: 5528
|
PXA255 isn't pin compatible with the StrongARM SA1100 inside the empeg so that'd be one ugly expansion board
|
|
Top
|
|
|
|
|
#227437 - 21/07/2004 13:00
Re: Memory boards
[Re: andym]
|
addict
Registered: 27/12/2001
Posts: 441
Loc: Central, NC, USA
|
What would be cool for a empeg redesign is a pullout screen the a little larger than the size of the Rio Central screen.
Sean in NC
|
|
Top
|
|
|
|
|
#227438 - 21/07/2004 14:28
Re: Memory boards
[Re: pca]
|
enthusiast
Registered: 30/01/2002
Posts: 264
Loc: Tucson, AZ
|
ONE..........Thanks
_________________________
Steve
|
|
Top
|
|
|
|
|
#227439 - 21/07/2004 16:19
Re: Memory boards
[Re: Micman2b]
|
Master Boot Logo(er)
Registered: 26/08/2003
Posts: 525
Loc: California
|
Quote:
What would be cool for a empeg redesign is a pullout screen the a little larger than the size of the Rio Central screen.
You mean like this?
_________________________
aka: [color:"blue"]Boot Logo Master[/color] PayPal Contributions for Custom Boot Logos are gladly accepted. <img src="/ubbthreads/images/graemlins/smile.gif" alt="" /> itirado[@]adobe[.]com
|
|
Top
|
|
|
|
|
#227441 - 21/07/2004 16:27
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 06/10/1999
Posts: 2591
Loc: Seattle, WA, U.S.A.
|
Quote:
Anyone interested?
Two, please!
_________________________
Jim
'Tis the exceptional fellow who lies awake at night thinking of his successes.
|
|
Top
|
|
|
|
|
#227442 - 21/07/2004 16:49
Re: Memory boards
[Re: Skunk]
|
enthusiast
Registered: 27/03/2002
Posts: 248
Loc: Swindon, UK
|
Skunk, when are you producing those? cos I'll take a couple.
_________________________
Andy
MK2a 60GB Amber 040103916 32mb/Light Kit
MK2a 50GB Amber 030102560 32mb
|
|
Top
|
|
|
|
|
#227443 - 21/07/2004 17:54
Re: Memory boards
[Re: skibum]
|
Master Boot Logo(er)
Registered: 26/08/2003
Posts: 525
Loc: California
|
Quote:
Skunk, when are you producing those?
I was hoping the cambridge folks would do that for me.
_________________________
aka: [color:"blue"]Boot Logo Master[/color] PayPal Contributions for Custom Boot Logos are gladly accepted. <img src="/ubbthreads/images/graemlins/smile.gif" alt="" /> itirado[@]adobe[.]com
|
|
Top
|
|
|
|
|
#227445 - 22/07/2004 16:01
Re: Memory boards
[Re: pca]
|
old hand
Registered: 30/07/2001
Posts: 1115
Loc: Lochcarron and Edinburgh
|
I'd like one. Perhaps two.
_________________________
Toby Speight
030103016 (80GB Mk2a, blue)
030102806 (0GB Mk2a, blue)
|
|
Top
|
|
|
|
|
#227446 - 23/07/2004 03:46
Re: Memory boards
[Re: pca]
|
Pooh-Bah
Registered: 09/09/1999
Posts: 1721
Loc: San Jose, CA
|
I'm interested in one maybe two depending on final price. I'm still looking for an empeg to replace my stolen one.
Calvin
|
|
Top
|
|
|
|
|
#227447 - 24/07/2004 15:49
Re: Memory boards
[Re: pca]
|
old hand
Registered: 30/07/2000
Posts: 879
Loc: Germany (Ruhrgebiet)
|
@PCA: I will take two, maybe three (plan on buying a third player :-D)
@mlord: If you want, I can borrow either my mkII or my mkIIa for you hijack updates:-)
cu,
sven
_________________________
proud owner of MkII 40GB & MkIIa 60GB both lit by God and HiJacked by Lord
|
|
Top
|
|
|
|
|
#227448 - 26/07/2004 11:11
Re: Memory boards
[Re: mlord]
|
member
Registered: 15/01/2002
Posts: 183
|
Oh yeah! Count me in!
_________________________
CLS
|
|
Top
|
|
|
|
|
#227449 - 26/07/2004 21:10
Re: Memory boards
[Re: clsmith]
|
journeyman
Registered: 28/12/2001
Posts: 99
|
Two for me please. I presume a web site will appear in due course? Also, whats the tuner count upto now?
_________________________
M2a/ Smoke/60gb/Tuner!! Thanks Joe
M2a/ Blue10gb Thanks Ian!
|
|
Top
|
|
|
|
|
#227450 - 02/08/2004 01:15
Re: Memory boards
[Re: pca]
|
enthusiast
Registered: 08/06/1999
Posts: 345
Loc: New Jersey, USA
|
i'm interested in 1 maybe 2 boards.
Do you need help setting up a web site for taking orders? i work at an isp doing web programming.
_________________________
-CHiP
|
|
Top
|
|
|
|
|
#227451 - 03/08/2004 02:44
Re: Memory boards
[Re: CHiP]
|
carpal tunnel
Registered: 13/02/2002
Posts: 3212
Loc: Portland, OR
|
Quote:
Do you need help setting up a web site for taking orders?
Presumably he'd use the same site he did for taking tuner orders.
|
|
Top
|
|
|
|
|
#227452 - 03/08/2004 15:48
Re: Memory boards
[Re: pca]
|
journeyman
Registered: 23/08/2002
Posts: 93
Loc: South Texas
|
Greetings PCA,
I am interested in aquiring one or two.
|
|
Top
|
|
|
|
|
#227453 - 07/08/2004 23:17
Re: Memory boards
[Re: pca]
|
new poster
Registered: 28/07/2000
Posts: 21
|
I'll take 2.
_________________________
MkIIa #040104267
|
|
Top
|
|
|
|
|
#227454 - 08/08/2004 00:35
Re: Memory boards
[Re: pca]
|
member
Registered: 07/10/2000
Posts: 112
Loc: CA, USA
|
I would like to order ten, thanks.
|
|
Top
|
|
|
|
|
#227455 - 08/08/2004 01:51
Re: Memory boards
[Re: pca]
|
carpal tunnel
Registered: 05/01/2001
Posts: 4903
Loc: Detroit, MI USA
|
Anyone have a tracking number yet?
_________________________
Brad B.
|
|
Top
|
|
|
|
|
#227457 - 12/08/2004 20:41
Re: Memory boards
[Re: pca]
|
member
Registered: 24/05/2000
Posts: 108
Loc: UK
|
I was about to buy a Mk2a, just so I could upgrade the memory.
Hopefully, this will save me the hassle.
I'll take two.
Bagpuss.
|
|
Top
|
|
|
|
|
#227458 - 17/08/2004 20:21
Re: Memory boards
[Re: pca]
|
addict
Registered: 03/07/2001
Posts: 663
Loc: Dallas, TX
|
One please. I'll hopefully be able to get this installed the same time I get lighted buttons.
MLord if you still need a volunteer for a RioCar model, I've got a spare.
Greg
_________________________
|
|
Top
|
|
|
|
|
#227459 - 18/08/2004 03:26
Re: Memory boards
[Re: Bagpuss]
|
journeyman
Registered: 02/07/2004
Posts: 95
Loc: 384400 km from the Moon
|
That's exactly my point - buy empegs for the memory boards. This gave me an excuse to get a little brother for my primary machine. Satisfying an itch up my b**t I went and made another heat sink [see attachment]. This one came from an old Pentium 200 MMX. You know, I'm getting better at those. Maybe I should ask Tom to reserve me a "Heatsinks" spot beside Tuners, Sleds, Buttons. Time to update that signature of mine 
|
|
Top
|
|
|
|
|
#227460 - 18/08/2004 09:53
Re: Memory boards
[Re: peakmop]
|
carpal tunnel
Registered: 17/01/2002
Posts: 3996
Loc: Manchester UK
|
Why have you got a heatsink on your CPU? Is there a point?
_________________________
Cheers,
Andy M
|
|
Top
|
|
|
|
|
#227461 - 18/08/2004 15:31
Re: Memory boards
[Re: andym]
|
journeyman
Registered: 02/07/2004
Posts: 95
Loc: 384400 km from the Moon
|
Yes, somehow I think it will prolong the life of my CPU on the hot days, but that's not the main point.
I have <sensored> cooking up, I will let you know how it goes.
|
|
Top
|
|
|
|
|
#227462 - 19/08/2004 02:30
Re: Memory boards
[Re: andym]
|
addict
Registered: 08/08/2001
Posts: 452
Loc: NZ
|
Not only that, he has a system fan!.. Hmmmmm have you overclocked your empeg ? :P
Let me know when you have liquid cooling in place
|
|
Top
|
|
|
|
|
#227463 - 20/08/2004 03:47
Re: Memory boards
[Re: JaBZ]
|
carpal tunnel
Registered: 13/02/2002
Posts: 3212
Loc: Portland, OR
|
Not sure I'd want to see that, especially with an Empeg. Seems most liquid cooling around this BBS is a result of funny comments.
|
|
Top
|
|
|
|
|
#227464 - 24/12/2004 11:47
Re: Memory boards
[Re: pca]
|
journeyman
Registered: 08/10/2004
Posts: 53
Loc: Trondheim, Norway
|
How is the progress in this dept? I would like to have two boards when/if they become available Merry Xmas!
_________________________
- Audun E -
|
|
Top
|
|
|
|
|
#227465 - 24/12/2004 16:26
Re: Memory boards
[Re: canuckInOR]
|
pooh-bah
Registered: 02/06/2000
Posts: 1996
Loc: Gothenburg, Sweden
|
Quote:
. Seems most liquid cooling around this BBS is a result of funny comments.
That was close!:D But it was a mere spray of cookie crumbs, easily vacuumed...
_________________________
/Michael
|
|
Top
|
|
|
|
|
#227466 - 24/12/2004 19:48
Re: Memory boards
[Re: AudunE]
|
stranger
Registered: 23/12/2001
Posts: 67
Loc: UK
|
I would like to say "Me too please". I'll take one if/when available.
_________________________
Vince, UK
RioCar 20GB + 20GB, tuner & stalk, 5 x Audio Receivers
|
|
Top
|
|
|
|
|
#227467 - 26/12/2004 12:15
Re: Memory boards
[Re: mlord]
|
addict
Registered: 03/03/2002
Posts: 687
Loc: Atlanta, Georgia
|
I hate posting 'me too' posts, but..
Me too! Definately interested!
Me.
_________________________
Mike 'Fox' Morrey
128BPM@124MPH. Love it!
2002 BRG Mini Cooper
|
|
Top
|
|
|
|
|
#227468 - 26/12/2004 19:21
Re: Memory boards
[Re: peter]
|
member
Registered: 19/03/2002
Posts: 144
Loc: Florida, USA
|
Could this be something for a new builder? Some of us are prepared to hose our disks to gain partition sizes. I want more binaries on my / but with a fixed 16mb it's kinda rough. we need bigger partitions on a newer builder image, methinks
_________________________
::: shadow45
|
|
Top
|
|
|
|
|
#227469 - 27/12/2004 13:10
Re: Memory boards
[Re: pca]
|
addict
Registered: 29/06/2002
Posts: 531
Loc: Triangle, VA
|
I was wondering if there were any updates to these? I definitly want one.
_________________________
-D
Modifying and Tweaking is a journey,
not a destination................................
MKIIa : 60gig - 040103286 - Blue - v2 + PCATS tuner
MKIIa : 20gig - 040103260 - Blue - v3a8 + Mark Lord Special Edition Cherry Dock
|
|
Top
|
|
|
|
|
#227470 - 30/12/2004 23:13
Re: Memory boards
[Re: AudunE]
|
carpal tunnel
Registered: 25/06/1999
Posts: 2993
Loc: Wareham, Dorset, UK
|
I've seen it, they are real - RSN!
_________________________
One of the few remaining Mk1 owners... #00015
|
|
Top
|
|
|
|
|
#227471 - 30/12/2004 23:32
Re: Memory boards
[Re: schofiel]
|
journeyman
Registered: 08/10/2004
Posts: 53
Loc: Trondheim, Norway
|
Cool!!! All I need now is a car that runs... 
_________________________
- Audun E -
|
|
Top
|
|
|
|
|
#227472 - 07/02/2005 15:00
Re: Memory boards
[Re: foxtrot_xray]
|
journeyman
Registered: 02/07/2004
Posts: 95
Loc: 384400 km from the Moon
|
I have claimed my "Me too" a long time ago. Now I was wondering if there is any news on the project? I'm quite patient, but I like to have an idea how patient should I be?
|
|
Top
|
|
|
|
#227473 - 07/02/2005 17:09
Re: Memory boards
[Re: peakmop]
|
carpal tunnel
Registered: 25/06/1999
Posts: 2993
Loc: Wareham, Dorset, UK
|
Oooh, a couple of days?
_________________________
One of the few remaining Mk1 owners... #00015
|
|
Top
|
|
|
|
|
#227474 - 07/02/2005 21:49
Re: Memory boards
[Re: schofiel]
|
carpal tunnel
Registered: 05/01/2001
Posts: 4903
Loc: Detroit, MI USA
|
_________________________
Brad B.
|
|
Top
|
|
|
|
|
#227475 - 08/02/2005 04:43
Re: Memory boards
[Re: schofiel]
|
carpal tunnel
Registered: 13/02/2002
Posts: 3212
Loc: Portland, OR
|
Quote:
Oooh, a couple of days?
Are you talking "a couple of days" as in literal 24 hour time periods, or "a couple of days" as in metaphorical God created the earth in 7 days type periods?
|
|
Top
|
|
|
|
|
#227476 - 08/02/2005 05:10
Re: Memory boards
[Re: schofiel]
|
addict
Registered: 04/09/2004
Posts: 527
Loc: Oklahoma
|
Quote:
Oooh, a couple of days?
No, that would be in Rob S. time...which is somewhere between dog years and light years....(just kidding, Rob...don't take it out on my player! It is already been thru too much!)
|
|
Top
|
|
|
|
|
#227477 - 08/02/2005 07:55
Re: Memory boards
[Re: canuckInOR]
|
carpal tunnel
Registered: 25/06/1999
Posts: 2993
Loc: Wareham, Dorset, UK
|
Well, yeah, from what I hear he has the boards back and is building up a couple of test prototypes now.
_________________________
One of the few remaining Mk1 owners... #00015
|
|
Top
|
|
|
|
|
#227478 - 09/02/2005 02:10
Re: Memory boards
[Re: schofiel]
|
addict
Registered: 03/08/1999
Posts: 451
Loc: Canberra, Australia
|
This is probably going to be a stupid question, but is this going to work with the Empeg Mark I? If so, I'll take one.
TIA,
Paul
_________________________
Owner of Mark I empeg 00061, now better than ever - (Thanks, Rod!) - and Karma 3930000004550
|
|
Top
|
|
|
|
|
#227479 - 09/02/2005 08:51
Re: Memory boards
[Re: PaulWay]
|
carpal tunnel
Registered: 17/01/2002
Posts: 3996
Loc: Manchester UK
|
I'm pretty sure this is a Mk2(a) only upgrade.
_________________________
Cheers,
Andy M
|
|
Top
|
|
|
|
|
#227480 - 09/02/2005 16:35
Re: Memory boards
[Re: andym]
|
carpal tunnel
Registered: 25/06/1999
Posts: 2993
Loc: Wareham, Dorset, UK
|
Yes, 2/2A only. However, memory upgrades for the Mk1 are a lot easier thank goodness. Drop a line on [email protected]
_________________________
One of the few remaining Mk1 owners... #00015
|
|
Top
|
|
|
|
|
#227481 - 11/02/2005 03:23
Re: Memory boards
[Re: schofiel]
|
new poster
Registered: 15/11/2002
Posts: 2
Loc: Toronto,Ontario,Canada
|
Count me in for one, I'm always up for throwing new things in my toys
|
|
Top
|
|
|
|
|
|
Previous Topic
Index
