It is the connector found on the sled which plugs in to the empeg when docked. I am not providing a sled in anyway. That's up to you.

Depending on demand I was also looking at providing the connectors with most of the wiring. Basically the same as the original sled minus the ISO connector, tuner connector and most probably the microphone socket. It would have the fuse holder, the DB9, the power filter and all 6 RCA jacks.

I am finding decent power filters hard to come by easily and as such I may leave them off - will make the harness much cheaper. I have not committed to harnesses yet. If I don't do the harnesses, you'll get 24 bits of metal (the terminals) and 1 bit of plastic (the plug).