OBD II Interface.... Build it | Off Topic | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » General Discussion » Off Topic » OBD II Interface.... Build it

Topic Options

#102585 - 02/07/2002 07:47 OBD II Interface.... Build it
robricc carpal tunnel Registered: 30/10/2000 Posts: 4931 Loc: New Jersey, USA	There's a pretty good thread going on over at Anandtech on OBD II stuff. This one is a kit you can build yourself for ~$30. It interfaces with your PC. The software is free. This interface looks pretty slick. For $50, it just plugs in and gives you the code on an LED readout. Handy if you already have a list of codes. _________________________ -Rob Riccardelli 80GB 16MB MK2 090000736
Top

#102586 - 02/07/2002 10:03 Re: OBD II Interface.... Build it [Re: robricc]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31597 Loc: Seattle, WA	This one is a kit you can build yourself for ~$30. It interfaces with your PC. The software is free. I looked into that one already, and it's not $30.00. The $30.00 option is for only a subset of the entire parts list, as far as I can tell. Still, even the complete kit is not a bad option at ~$50-$75, and I've messed with the software in "test" mode and it looks pretty cool. _________________________ Tony Fabris
Top

#102587 - 02/07/2002 10:04 Re: OBD II Interface.... Build it [Re: robricc]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31597 Loc: Seattle, WA	This interface looks pretty slick. For $50, it just plugs in and gives you the code on an LED readout. Handy if you already have a list of codes. Slick, but useless if it doesn't clear the codes for you. _________________________ Tony Fabris
Top

View All Topics