will backlit button kits work on mk2 and mk2a? | General | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » General » will backlit button kits work on mk2 and mk2a?

Topic Options

#117984 - 26/09/2002 07:52 will backlit button kits work on mk2 and mk2a?
TomGreen new poster Registered: 26/09/2002 Posts: 2	I had read that the shaft on the rotary knob of the empeg was different than the rio car, so I was curious if the button kits work on both models Thanks
Top

#117985 - 26/09/2002 07:54 Re: will backlit button kits work on mk2 and mk2a? [Re: TomGreen]
JBjorgen carpal tunnel Registered: 19/01/2002 Posts: 3584 Loc: Columbus, OH	If you click the Buttons link at the top of the page and read down to where the knobs are, you'll find that you get two knobs, one MK2 and one MK2a. _________________________ ~ John
Top

#117986 - 26/09/2002 07:58 Re: will backlit button kits work on mk2 and mk2 [Re: TomGreen]
mtempsch pooh-bah Registered: 02/06/2000 Posts: 1996 Loc: Gothenburg, Sweden	My kit came with knobs for both MkII and MkIIa (round vs slotted axle), and I'd imagine the board to fit both as I believe the body of the encoder (as opposed to the axle end) is identical/similar enough... Edit: should probably make a habit of rechecking the thread immediately before submitting... /Michael Edited by mtempsch (26/09/2002 08:00) _________________________ /Michael
Top

#117987 - 26/09/2002 08:04 Re: will backlit button kits work on mk2 and mk2 [Re: TomGreen]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	Yes.
Top

View All Topics