I upgraded today. I came across the known problems so I removed the <CR> characters, set the broadcast address, added the clear icon. Everything worked after that.

Thanks again for all the hard work.

Bryan: tRio 0.1.5, Jreceiver 0.2.5 running Debian Sarge AMD-K6 300mhz 128mb mem, only 5k mp3s using 15gb, 2 Dell, 2 rebadged SonicBlue DARs

Upgraded the eagerly anticipated 0.1.5 - Hooray!

Fixed my ability to put the server on my Linksys Gigabit switch, and have the Rio's on my Router's 10/100 & Powerline ports. YEAH!!! Able to use Multicast in this configuration when I wasn't able to before. Not sure what you fixed, but I'm REALLY glad!

Had to rewrite the trio.sh script since it wouldn't play nice on my Red Hat 9 server - not sure why, but kept complaining. Had to do it last time, too, but after I did that (took out all the directory finding code, and just declared everything directly) it worked.

-Dan

Red Hat 9 Server, on a Linksys Gigabit switch
3 Dell Rio's - 1 on Powerline, 2 on Ethernet, hanging off my Siemens Powerline Router