Last night while I toyed with the computer for my car I was struck with an idea, I did about 2 hours of web research and no one seems to be making one.

I am looking for a GOOD programmer, someone that can write device drivers and a Electronics engineer, If I can make this happen and it works the way I think it would, it might save a few lives and be worth a few bucks.

I don't want to give away my idea but I need someone that can write custom Windows or CE drivers for embedded devices (Linux would also work and might be more stable)

ODB-2 application diagnostics software running on a handheld PDA running WinCE? Someone's beaten you to it. Tuning software for adjustment of ECUs? Difficult - almost untamperable.

Still, I am unemployed, and I can design hardware (I'm and electronics engineer) and write software on many different platforms. Me! Me!

Gizzajob, I can do that.

Nope it is not a ODBII running on palm. I don't want to give it away right now but I am building a marixices with what will be needed as far as logic. will post this week. UNtill I can nail down VC I don't want to let the cat out of the bag.

Here is some of the logic in a general manner so I don’t give away the idea
So far I am up to 600 events and event options

Turn on SW.
D1 Activates If D1 is less then Threshold then Display ER1
M=1 Activates

D2 Activates If D2 is less then Threshold then Display ER1
M=1 Activates

If GR = less then 3% then Display M2 and Do function N1 Display Result from N1

If R1 > Threshold then Display M3

Turn on IR1
V1 Switched to Main, S1 Activates, Output from S1 Overlays on V1 and M1, If DS 1 is less then Threshold then Display M4







SW=Switch
D=Device
E=Event
M=Modules (small resizable applets that display information)
ER=Errors

Embeded windows or Linux both have good and bad points but I'll leave this up to the people I hire to program it once I get my VC funding.