USB/Ethernet | Technical / Troubleshooting | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » USB/Ethernet

Topic Options

#259495 - 01/07/2005 03:37 USB/Ethernet
CFinch106 new poster Registered: 14/07/2004 Posts: 23	I'm on Windows XP Pro and everytime I connect to the riocar it says "Unable to open usb connection." I have ver. 2 of the player firmware and emplode software installed, with XP drivers. I've tried to do it through Ethernet but it doesn't ever find the riocar, I don't know how to get songs to it other than the serial cable and that's rediculous. I don't know what settings to use for ethernet either. It's also saying "download failed while initializing Error 0xc0041837" Edited by CFinch106 (01/07/2005 03:48)
Top

#259496 - 01/07/2005 05:19 Re: USB/Ethernet [Re: CFinch106]
SonicSnoop addict Registered: 29/06/2002 Posts: 531 Loc: Triangle, VA	Have you tried using DHCP for your network settings? what ip settings do you use for your pc? ipconfig /all if its winxp should show you _________________________ -D Modifying and Tweaking is a journey, not a destination................................ MKIIa : 60gig - 040103286 - Blue - v2 + PCATS tuner MKIIa : 20gig - 040103260 - Blue - v3a8 + Mark Lord Special Edition Cherry Dock
Top

#259497 - 01/07/2005 06:17 Re: USB/Ethernet [Re: SonicSnoop]
CFinch106 new poster Registered: 14/07/2004 Posts: 23	yeah I have a Linksys router, so it's 192.168.1.1, and everything is DCHP.
Top

#259498 - 01/07/2005 07:48 Re: USB/Ethernet [Re: CFinch106]
Roger carpal tunnel Registered: 18/01/2000 Posts: 5683 Loc: London, UK	Quote: yeah I have a Linksys router, so it's 192.168.1.1, and everything is DCHP. Does the Rio Car get an IP address? You can check this from the About option on the player's menu. _________________________ -- roger
Top

#259499 - 01/07/2005 10:43 Re: USB/Ethernet [Re: Roger]
JBjorgen carpal tunnel Registered: 19/01/2002 Posts: 3584 Loc: Columbus, OH	For USB, upgrade to version 2.0 final and carefully read the release notes. It contains the information and the driver to swap your existing usb driver with one compatible with Windows XP. _________________________ ~ John
Top

#259500 - 01/07/2005 15:13 Re: USB/Ethernet [Re: CFinch106]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31597 Loc: Seattle, WA	Cfinch106, please read these two FAQ entries: Why doesn't Emplode work via USB on Windows XP? Why can't I get ethernet to work? Both of those should solve your problems if you follow the instructions carefully and read all the sub-links. _________________________ Tony Fabris
Top

#259501 - 03/07/2005 00:54 Re: USB/Ethernet [Re: tfabris]
CFinch106 new poster Registered: 14/07/2004 Posts: 23	I've done the USB update and it still crashes when it loads up, I'm trying to switch to 10BaseT. Edited by CFinch106 (03/07/2005 00:55)
Top

#259502 - 03/07/2005 01:29 Re: USB/Ethernet [Re: CFinch106]
CFinch106 new poster Registered: 14/07/2004 Posts: 23	Got it going through ethernet, I have to push the cable towards the floor for the link light to show up, guess somethings bent
Top

#259503 - 03/07/2005 02:33 Re: USB/Ethernet [Re: CFinch106]
SonicSnoop addict Registered: 29/06/2002 Posts: 531 Loc: Triangle, VA	Have you tried other cables? or maybe the same cable just switched sides of it to see if its the empeg or the cable that has the problem with link? Glad you were able to get it wsorking with ethernet. _________________________ -D Modifying and Tweaking is a journey, not a destination................................ MKIIa : 60gig - 040103286 - Blue - v2 + PCATS tuner MKIIa : 20gig - 040103260 - Blue - v3a8 + Mark Lord Special Edition Cherry Dock
Top

#259504 - 03/07/2005 05:03 Re: USB/Ethernet [Re: CFinch106]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31597 Loc: Seattle, WA	Quote: I have to push the cable towards the floor for the link light to show up You could have some broken circuit traces on the motherboard. But it could be something as simple as bent pins on the ethernet jack. Earlier, I linked a FAQ entry which gave instructions on how to fix the pins if that's the case. It also could be a bad cable. Again, described in that FAQ entry. Got another cable to try? _________________________ Tony Fabris
Top

#259505 - 03/07/2005 07:08 Re: USB/Ethernet [Re: tfabris]
CFinch106 new poster Registered: 14/07/2004 Posts: 23	I tried a few cables the first time and got no link, but I wasn't pressing, so I guess it's something more serious.
Top

#259506 - 06/07/2005 21:43 Re: USB/Ethernet [Re: CFinch106]
CFinch106 new poster Registered: 14/07/2004 Posts: 23	it had a pin bent beyond repair, is there a way to put a new ethernet jack in the unit?
Top

#259507 - 06/07/2005 23:20 Re: USB/Ethernet [Re: CFinch106]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31597 Loc: Seattle, WA	Quote: it had a pin bent beyond repair, is there a way to put a new ethernet jack in the unit? Yes. _________________________ Tony Fabris
Top

#259508 - 07/07/2005 13:00 Re: USB/Ethernet [Re: CFinch106]
schofiel carpal tunnel Registered: 25/06/1999 Posts: 2993 Loc: Wareham, Dorset, UK	Where, inside the ethernet socket? Can you post a picture? Original Ethernet sockets are available from me. _________________________ One of the few remaining Mk1 owners... #00015
Top

#259509 - 24/07/2005 07:57 Re: USB/Ethernet [Re: schofiel]
CFinch106 new poster Registered: 14/07/2004 Posts: 23	I opened the case of the unit itself and tried to fix a pin with a small flathead scredriver and ended up knocked other pins out of their slots, then trying to put those back I bent them.
Top

View All Topics