I am running v2.00final and Hijack 440. I have about 80GB of tracks on two drives. I am able to successfully run emplode, but when I ran jEmplode v70, I got a segfault error. Now I can't do a manual rebuild or run emplode.
The following is a boot dump, and then the errors I get after a manual database rebuild. Any takers?
Code:
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!
e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kernel.
Linux version 2.2.17-rmk5-np17-empeg52-hijack-v440 ([email protected]) (gcc version 2.95.3 20010315 (release)) #2 Fri Sep 23 15:03:11 EDT 2005
Processor: Intel StrongARM-1100 revision 11
Checking for extra DRAM:
c1000000: wrote ffffffff, read e91ba9f0
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 9, serial number 30102344) 16MB DRAM
Command line: mem=16m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 15008k/16M available (984k code, 20k reserved, 368k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 67706d65 'empg'
Found custom animation at offset 0x9c37c
Tuner: loopback=0, ID=-1
Scheduling custom logo.
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0005300).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
hda: TOSHIBA MK1031GAS, ATA DISK drive
hdb: TOSHIBA MK4018GAP, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: TOSHIBA MK1031GAS, 95396MB w/0kB Cache, CHS=1161/255/63
hdb: TOSHIBA MK4018GAP, 38154MB w/0kB Cache, CHS=4864/255/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])
SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:09:28
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... |#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...#•••…‘)5change_root: old root has d_count=1
Trying to unmount old #empeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Remounting first music partition read-only
Remounting second music partition read-only
Press 'q' now to go into development mode. You Have Zero Seconds To Comply...
Starting player
Timezone: Atlantic/South_Georgia
Hijack: intercepting config.ini
hijack: removed menu entry: "Hard Disk Detection"
hijack: removed menu entry: "Serial Port Assignment"
khttpd: listening on port 80
kftpd: listening on port 21
player.cpp : 385:empeg-car 2.00 2003/04/01.
! tags.cpp : 61:Failed to open tags (0xc0041002).
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
Abnormal player termination
Player received SIGINT, user interruption
Switching to shell-player loop
Starting bash.
/empeg/bin # rwm
/empeg/bin # ls /drive0/var
config.ini
/empeg/bin # ls /drive1/var
config.ini
/empeg/bin # swapon /swapfile
Adding Swap: 16028k swap-space (priority -1)
/empeg/bin # exit
logout
Shell exit
Starting playTimezone: Atlantic/South_Georgia
er
Hijack: intercepting config.ini
player.cpp : 385:empeg-car 2.00 2003/04/01.
! tags.cpp : 61:Failed to open tags (0xc0041002).
player(24): user memory violation at pc=0x020e1694, lr=0x74614c20 (bad address=0x4088c000, code 0)
pc : [<020e1694>] lr : [<74614c20>]
sp : bffff81c ip : 65685428 fp : bffff838
r10: 00000000 r9 : bffffca0 r8 : 00000000
r7 : 00000018 r6 : 00000008 r5 : 00297330 r4 : 37272065
r3 : 30372720 r2 : 00000000 r1 : 02152850 r0 : 4088c000
Flags: nZCv IRQs on FIQs on Mode USER_32 Segment user
Control: C0F3D17D Table: C0F3D17D DAC: 00000015
Function entered at [<020e15bc>] from [<020e1484>]
r7 = 4088BFDF r6 = 4088BFE0 r5 = 02152829 r4 = 00000026
Function entered at [<020e1410>] from [<0207ca18>]
r7 = BFFFFCDC r6 = 02152828 r5 = 00000027 r4 = BFFFFCDC
Function entered at [<0207c9c8>] from [<02056200>]
r6 = 02135920 r5 = 0214D814 r4 = 00000000
Function entered at [<02055e84>] from [<02061670>]
r10 = 00000000 r9 = 02112374 r8 = 0214D808 r7 = BFFFFCDC
r6 = 00000000 r5 = 02175B90 r4 = 0000AE86
Function entered at [<02061594>] from [<020322a4>]
r7 = BFFFFD88 r6 = BFFFFD80 r5 = 0214EF4C r4 = 02175B80
Function entered at [<02032200>] from [<0200881c>]
r6 = BFFFFD84 r5 = 0214EF44 r4 = BFFFFD80
Function entered at [<020087e4>] from [<0202fcbc>]
r5 = BFFFFD80 r4 = BFFFFD8C
Function entered at [<0202fa0c>] from [<0202f758>]
r10 = BFFFFEE4 r9 = 00000001 r8 = 0214D808 r7 = BFFFFEE8
r6 = 00000086 r5 = BFFFFDF4 r4 = BFFFFDF4
Function entered at [<0202f718>] from [<02031668>]
r6 = 00000086 r5 = FFFFFFFF r4 = BFFFFDF4
Function entered at [<02031464>] from [<02031794>]
r10 = 02031730 r9 = 00000000 r8 = 02112060 r7 = 00000000
r6 = 020000C0 r5 = 00000001 r4 = BFFFFF64
Function entered at [<02031730>] from [<020c8ea4>]
r5 = BFFFFF64 r4 = 00000001
Function entered at [<020c8dc8>] from [<02000104>]
r10 = 00000000 r8 = 00000000 r7 = 00000000 r6 = 00000000
r5 = 00000000 r4 = 00000000
#Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
Abnormal player termination
Player received signal 11
Starting bash.
/empeg/bin #
Previous Topic
Index