Here is another boot log for my mkIIa empeg....I cannot get past the Rio digital audio logo.....it hangs there....Help!




empeg-car bootstrap v1.02 20001106 ([email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Pen

e000 v1.04st: wrote
Copying kernel...wrote 0x5
Calling linux kernel...
empeg
Uncompressing Linux..................................... done, booting the kerne
T

ide_data_test: wrote 0xffff read 0xffa5
l.
Linux version 2.2.17-rmk5-np17-empeg52-hijack-v479 ([email protected]) (gcc versions, se
id
2.95.3 20010315 (release)) #2 Tue Sep 4 09:18:20 EDT 2007
ide_dat
hda: ST9100823A, ATA DI
Processor: Intel StrongARM-1100 revision 9_data_test: wrote 0x0000 read 0xffa5d 0xff
Checking for extra DRAM:lt=0 on
c1000000: wrote ffffffff, read e28cc001
ide_data_test: wro
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.st: wrote 0x
ide_data_test: wrote 0xffff read 0x
empeg-car player (hardware revision 9, serial number 30102295)


POSIX conformance testing by UNIFIXki
Linux NET4.0 for Linux 2.2itialized100823A, ATA DISK
Based upon Swansea University Computer Society NET3.039
smc chip id/revision 0x3349_data_test: wrote 0x0000
NET4: Linux TCP/IP 1.0 for NET4.0
smc9194.c
IP Protocols: ICMP, UDP, TCPman ([email protected])
TCP: Hash tables configured (ehash 16384 bhas
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART: Mounted root (ext2 filesystem).0x55a5ll result
Signature is 20706d65 'emp '
Found custom animation at offset 0x99380)
hda: ST
Tuner: loopback=0, ID=-1 pump...VFS: Mounted roo
show_message("Hijack v479 by Mark Lord")
empeg display initialised.ide_data_test: wrote 0x000
empeg dsp audio initialised
empeg dsp mixer initialisedoot has d_count=1
empeg dsp initiali

empeg RDS driver initialised
empeg power-pic driver initialised (first boot) peace...it seems not. Let fly the Penguins of
RAM disk driver initialized: 16 RAM disks of 4096K size
ide_data_test: wrote 0xaaaa read
empeg single channel IDE

e
Probing primary interface...
Copying kernel...
ide_data_test: wrote 0x0000 read 0xff80kernel...ide_data_test: wrote 0x
ide_data_test: wrote 0xffff read 0xff80Uncompressing Linux....................
ide_data_test: wrote 0xaaaa read 0xaa80
2.
ide_data_test: wrote 0x5555 read 0x5580:18:20 EDT 2007
ide_data_test: wrote 0x0000 read 0xff804.c:v0.12 03/06/96 by Erik Stahlman
ide_data_test: wrote 0xffff read 0xff80S: Mounted root (ex
ide_data_test: wrote 0xaaaa read 0xaa80
Calibrating delay loop... 207.67 B
ide_data_test: wrote 0xaaaa read 0xaa00
ide_data_test: wrote 0x5555 read 0x5500
hda: ST9100823A, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: ST9100823A, 95396MB w/8192kB Cache, CHS=12161/255/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:08:f
7
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initKernel panic: No init found. Try passing i
nit= option to kernel.