Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#336300 - 21/08/2010 17:27 Empeg to receive A2DP Bluetooth audio?
FireFox31
pooh-bah

Registered: 19/09/2002
Posts: 2494
Loc: East Coast, USA
Can the empeg receive A2DP Bluetooth audio by adding a USB Bluetooth dongle? This would save me from buying a new headunit just to receive A2DP from my Palm Pre or Motorola Droid.

I remember this old thread, but a lot may have changed in five years.

Thanks.
_________________________
-
FireFox31
110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set

Top
#336306 - 21/08/2010 19:13 Re: Empeg to receive A2DP Bluetooth audio? [Re: FireFox31]
tonyc
carpal tunnel

Registered: 27/06/1999
Posts: 7058
Loc: Pittsburgh, PA
The empeg USB is slave mode only, so there's going to be no plug-and-play solution. There are some possible workarounds in this thread but they definitely fall into the "project" category.
_________________________
- Tony C
my empeg stuff

Top
#336308 - 21/08/2010 19:41 Re: Empeg to receive A2DP Bluetooth audio? [Re: tonyc]
FireFox31
pooh-bah

Registered: 19/09/2002
Posts: 2494
Loc: East Coast, USA
Thanks for confirming that. It's easier to buy $150 headunits for my cars than enter the "Project" category.

Thanks again.
_________________________
-
FireFox31
110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set

Top
#336344 - 23/08/2010 15:32 Re: Empeg to receive A2DP Bluetooth audio? [Re: FireFox31]
oliver
addict

Registered: 02/04/2002
Posts: 691
what about getting a bluetooth reciever with an audio output?

A very very quick google found this (granted its discontinued, but it might be worth spending some time looking for something similar)
_________________________
Oliver mk1 30gb: 129 | mk2a 30gb: 040104126

Top
#336966 - 10/09/2010 15:59 Re: Empeg to receive A2DP Bluetooth audio? [Re: oliver]
Dava
member

Registered: 06/12/2000
Posts: 192
Loc: Bucks UK
Hi,

I have experimented with various dongles to get A2DP so that I can quickly listen to my phone or PDA when I have some new tracks and it is not convenient to upload to the empeg.

Most have been poor in terms of audio quality but yesterday I received one of these:

http://www.7dayshop.com/catalog/product_info.php?cPath=777_12&products_id=107199

At £12 delivered, the audio quality is great when connected to the AUX input, and it works with all of my A2DP sources and also has AVCRP so that you can FF/REW etc.

When runniing satnav on the phone, the audio also comes out of the device, over the top of the music, again with good quality.

You do get pops and clicks as it powers up and connects but when playing music, there is no background noise, even on quiet passages.

All in all I am well chuffed with the added functionality for £12.
_________________________
MK2 smoked 32Gb S/n 090000949 MK2a Blue 20GB racked and out of sync

Top
#337001 - 11/09/2010 19:44 Re: Empeg to receive A2DP Bluetooth audio? [Re: Dava]
gw0udm
new poster

Registered: 12/04/2002
Posts: 1
How does this work in practice? Do you need to press any buttons etc to establish the connection or could it be done automatically?

Reason I ask is that I'm looking for something like this bury in the dash, and have the phone automatically connect when the car powers up. I've seen a few, but it's never clear if you have to manually establish the connection on the device.

Thanks

JAmes

Top
#337233 - 16/09/2010 16:43 Re: Empeg to receive A2DP Bluetooth audio? [Re: Dava]
wfaulk
carpal tunnel

Registered: 25/12/2000
Posts: 16706
Loc: Raleigh, NC US
I'm not sure I understand.

That device is an A2DP receiver, right? And then you have a cable running from its headphone jack to the empeg's aux jacks? Do you have the device mounted on your dash? Now that I think about it, that's a pretty good solution.
_________________________
Bitt Faulk

Top
#338120 - 10/10/2010 11:34 Re: Empeg to receive A2DP Bluetooth audio? [Re: wfaulk]
Dava
member

Registered: 06/12/2000
Posts: 192
Loc: Bucks UK
You do have to power it on with a button but then it automatically connects with the last used BT device. I fixed a 3.5mm jack plug behind another device on the dash with just the pin sticking out, this then holds the adapter mechanically as well as connecting it to the empeg's aux so it looks quite tidy and you can get to its AVCRP buttons.

I also wanted an autoconnecting one and the most likely candidate was at least twice as much and was still not guarenteed to work as I suspected so this is good cheap compromise and is removeable for other uses.
_________________________
MK2 smoked 32Gb S/n 090000949 MK2a Blue 20GB racked and out of sync

Top
#342797 - 24/02/2011 23:44 Re: Empeg to receive A2DP Bluetooth audio? [Re: Dava]
dcosta
enthusiast

Registered: 04/02/2002
Posts: 277
Loc: Massachussetts
Jabra Cliiper...
http://www.jabra.com/sites/mobile/na-us/products/pages/jabraclipper.aspx

Bluetooth receiver. Mini Jack out. Mini usb charging port. Sound Quality is excellent.
...In the car, at home, at the gym, take it everywhere.
_________________________
__________ davecosta Hijacked 60GB MKIIa 2.0b13

Top
#342798 - 25/02/2011 00:27 Re: Empeg to receive A2DP Bluetooth audio? [Re: dcosta]
gbeer
carpal tunnel

Registered: 17/12/2000
Posts: 2665
Loc: Manteca, California
Originally Posted By: dcosta
Jabra Cliiper...
http://www.jabra.com/sites/mobile/na-us/products/pages/jabraclipper.aspx

Bluetooth receiver. Mini Jack out. Mini usb charging port. Sound Quality is excellent.
...In the car, at home, at the gym, take it everywhere.


I don't get this one at all. What's the point of plugging earbuds into a gadget like that instead of directly into the phone.
_________________________
Glenn

Top
#342812 - 25/02/2011 08:35 Re: Empeg to receive A2DP Bluetooth audio? [Re: gbeer]
andy
carpal tunnel

Registered: 10/06/1999
Posts: 5916
Loc: Wivenhoe, Essex, UK
Because:

- it is tiny
- it weighs nothing (20g)
- it clips on
- you can leave your phone in your bag

I don't have need of something like that myself, but I can see how it would be useful for some people.

_________________________
Remind me to change my signature to something more interesting someday

Top
#343777 - 25/03/2011 23:26 Re: Empeg to receive A2DP Bluetooth audio? [Re: gbeer]
dcosta
enthusiast

Registered: 04/02/2002
Posts: 277
Loc: Massachussetts
you could also do what I do and connect the mini jack out on the Jabra Clipper to the RCA input on the empeg. Then your phone's audio is piped over bluetooth through the clipper and into the AUX in on the empeg. You get a phone call, the music (your phone is playing) pauses. Answer by pressing the center button on the clipper. Speak into the clipper, caller's voice comes in through empeg (car speakers)... Pretty awesome esp if your car has no bluetooth... ;-)
_________________________
__________ davecosta Hijacked 60GB MKIIa 2.0b13

Top