Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#356906 - 22/12/2012 14:27 1mm thick styro foam panels
Taym
carpal tunnel

Registered: 18/06/2001
Posts: 2504
Loc: Roma, Italy
Guys, I am having a hard time finding them. Do you know any shop on line in EU?

They don't have to be big. I am using it to mount a tweeter in a self-made speaker, so I will of course have to cut it as needed, but can't be thicker than 1mm.

Thank you!
_________________________
= Taym =
MK2a #040103216 * 100Gb *All/Colors* Radio * 3.0a11 * Hijack = taympeg

Top
#356907 - 22/12/2012 15:27 Re: 1mm thick styro foam panels [Re: Taym]
peter
carpal tunnel

Registered: 13/07/2000
Posts: 4180
Loc: Cambridge, England
1mm styrofoam? Surely that wouldn't hold a tweeter, or anything much. If you want 1mm solid polystyrene, that's easier to find.

Peter

Top
#356908 - 22/12/2012 16:41 Re: 1mm thick styro foam panels [Re: peter]
gbeer
carpal tunnel

Registered: 17/12/2000
Posts: 2665
Loc: Manteca, California
Go to your butcher shop in the local grocery store. The trays the meat is sold in should work. They'll most likely give you one.

A do it your self'r will breakout the hot wire and slice off the needed piece.
_________________________
Glenn

Top
#356909 - 22/12/2012 20:09 Re: 1mm thick styro foam panels [Re: gbeer]
gbeer
carpal tunnel

Registered: 17/12/2000
Posts: 2665
Loc: Manteca, California
_________________________
Glenn

Top
#356910 - 23/12/2012 08:17 Re: 1mm thick styro foam panels [Re: gbeer]
Taym
carpal tunnel

Registered: 18/06/2001
Posts: 2504
Loc: Roma, Italy
Thank you.
I need 1.0mm because it will just serve as thin layer between tweeter and wooden case, so sorry for not being clear. Your recommendation above do help!

I found this at modelshop.co.uk, which is what I was looking for: http://www.modelshop.co.uk/styrofoam-blue-1-x-330-x-580mm-4718-p.asp smile


Edited by Taym (23/12/2012 08:20)
_________________________
= Taym =
MK2a #040103216 * 100Gb *All/Colors* Radio * 3.0a11 * Hijack = taympeg

Top