are there problems with the djsa 220 ibm 20 gig | General | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » General » are there problems with the djsa 220 ibm 20 gig

Topic Options

#36241 - 10/08/2001 04:40 are there problems with the djsa 220 ibm 20 gig
silvercas member Registered: 23/10/2000 Posts: 162	welp I decided for now that i Need a 20 gig drive as my second drive. I was originally going to get that new 48 gig as the 2nd but decided for now the 20 gig will sufice ( beside save me some money). Are there any problems with this drive and my original 6gb in my mkII?
Top

#36242 - 10/08/2001 05:32 Re: are there problems with the djsa 220 ibm 20 gig [Re: silvercas]
edwin member Registered: 26/09/2000 Posts: 194 Loc: Druten, The Netherlands	I've had no troubles with my factory installed IBM 6Gb and added IBM 20Gb drives, so far... Please do read the FAQ about upgrading very thoroughly, It has some hints and tips you are looking for (washers, isolation). Good luck! Edwin de Vaan mk2 rev.7 # 080000263 (queue 1232) 6+20Gb blue/red _________________________ [white]______________[/white] Edwin de Vaan aka FLaSHmAStER
Top

#36243 - 10/08/2001 05:40 Re: are there problems with the djsa 220 ibm 20 gig [Re: edwin]
silvercas member Registered: 23/10/2000 Posts: 162	yes thats what I did.. I read about the washers and other things.. just wanted to make sure nothing else exisited!
Top

#36244 - 10/08/2001 05:51 Re: are there problems with the djsa 220 ibm 20 gig [Re: silvercas]
tonyc carpal tunnel Registered: 27/06/1999 Posts: 7058 Loc: Pittsburgh, PA	I installed a DJSA 220 in my empeg and it works perfectly, save the problem I had with the jumper falling off, but that was my fault. Use some electrical tape to keep the jumper on if you have similar problems. -Tony MkII #554 _________________________ - Tony C my empeg stuff
Top

#36245 - 10/08/2001 09:43 Re: are there problems with the djsa 220 ibm 20 gig [Re: tonyc]
synergy enthusiast Registered: 20/02/2001 Posts: 345	Use some electrical tape to keep the jumper on if you have similar problems. When I just did my 30G upgrade, I used a drop of solder on the jumper... I'm not taking any chances... Taking the cover off once was quite enough for me, thank you very much. I really didn't enjoy working that close to the display board. _________________________ Synergy [orange]mk2, 42G: [blue] mk2a, 10G[/blue][/green] I tried Patience, but it took too long.
Top

View All Topics