Anyone have any tips or gotchas when they installed their tuners? Mine should show up on the doorstep today (or else I'll pick it up at fedex today), and I was wondering if it was a simple deal.
On my Acura, it was a 15 minute job, using the cutout in the bottom of the sled.
a> Grab pigtail and antenna connection. Slide Tuner into slot below Sled. Connect pigtail to tuner, connect antenna to tuner.
b> Insert EMPEG and make sure it works.
c> notice that the reception is horrible, and realize that you were an idiot and didn't hookup the power antenna wire.
d> Unplug tuner, remove tuner.
e> Find the original harness, splice the power antenna lead to the additional pigtail Empeg supplies.
f> Repeat Steps a and b.
g> Kick yourself for doing this on your lunch hour in the parking lot on a very warm day.
h> Try to find RDS stations while trying to cool off via the AC.
It really was quite easy in my case, as I had already made sure all of my connections were easily accessible, and had just enough room under the Empeg in my dash.
Previous Topic
Index