Mark,

I found the problem. in your example is written:

[ir_translate]
PopUp0=Info,Mark,Repeat,SelMode,Shuffle,Source,Tuner,Visual

But I did now only:
[ir_translate]
PopUp0=Info,Visual

And this is working! I think there is a little mistake on your documentation.

Because of the NextSrc. I did this only test here on my desk. But I haven't here a Tuner...I think this is the problem. Because you are writing that Player -> Tuner -> Aux are the steps.

bye

The problem with the Popup0 example was that I said "Visuals" instead of "Visual".

The "NextSrc" works for me, on a standalone player with no tuner.

-ml

Sorry Mark,

But I have two (Mk2 and Mk2a) Players with 2.0B7 and V156. But If I choose form the "Knob Press Redefiniton" "NextSrc" there is no action on my quick press. But if I change to all other definitions it works.

Also if I have it on the PopUp0 Menu, I can see this name but after pressing the knob nothing happens. It goes back to the normal player screen.

I think that the Device have to go to the AUX mode, if the Tuner is not present. Or not?

Let me try it tomorrow in my car.

I really estimate your work! And the only think I try to do, is helping you to develop a great work.

bye

Okay, so you mean "NextSrc" on the knob-press menu (it also exists in [ir-translate]..).. Well, that works just fine for me, on both a Mk2 and Mk2a, with and without a Tuner.

Too bad for you.

And the PopUp0 requires that you add a line to your config.ini, and the example I originally posted said "Visuals" on that line, which is an error, it should have said "Visual". Fix that, and it also works fine.

-ml

Yes I know

I changed also the mistake in the config.ini. If there is a mistake like "Visuals" the PopUp0 is not working.

But anyway. I have thousand of of more features because of Hijack. So there is no problem, if only one is not working.....

Thanks

Two questions:

1) If knob press is redefined to activate "Details" and the Empeg is left displaying details should a redefine of knob press to something else still work. I got into this trap inadvertantly and when I tried to redefine knob press as a popup it wouldn't! Not a big deal, but I had to go back to details and back out to a regular display mode before I could use the knob press linked popup.

2) Would it be possible to create a symbolic name for cycling through the auto volume adjust modes that could be included in a popup menu as is available in the regular Hijack menu with "VolAdj+"?

Playlist browsing is GREAT!!!

Lynn

1) Yes, other knob press definitions should still work when Details are displayed.. or at least that's what happened when I tried it just now.

2) I'll add a "VolAdj" buttoncode as part of v157 tonight.

Cheers

Okay, v157 is out. New this time around:

-- new syntax for playlist browsing:

http://your.empeg/drive0/fids/101?.html

-- two drive systems will still have troubles (not fixed yet).

-- .m3u (mp3 playlist) files are generated now, for individual tunes as well as albums. But not for nested playlists. Let me know if it works or not.

-- A "VolAdj" virtual button code has been added for ir_translate. Completely untested. Again, feedback will be useful.

-- The missing button name for "Source" has been added.

Have fun!

-ml

2) Thanks, who could ask for anything more (responsiveness wise at least).

1) Working now for me too, just had to wait for "Details" to time out.

Lynn

Ooops small bug (m3u for single tunes was broken) in v157 -- v158 now replaces it.

-ml

v158

m3u for single tunes is working.
m3u for playlists comes up with a 404 for each tune inside winamp...

The file info for a tune inside winamp looks like http://192.168.168.20/drive0/fids/13920
but when I play it by itself it looks like http://192.168.168.20/drive0/fids/3660 and works ok. Looks like a wrong fid.

Tom

Edit:.. ok.. easy solution.. the numbers generated in the playlist .m3u are in decimal, should be hexidecimal..

Edit: The times still appear to be 1 second too long.

The main problem is just a missing step in the conversion...he'll catch that one right quick. The one second thing could be a rounding problem. Certainly no biggie.

Thanks a lot for your time, Mark...it's coming along very nicely!

Mark is it possible PopUp menus got broken in v158? I flashed from v154 to v158 and my PopUp doesn't, well, pop up. Instead, I get this on the serial when I push the knob:

popup_activate(0fffff9): 00000000

The relvant lines in config.ini:

[hijack]

PopUp1=Tweak



[ir_translate]

PopUp0=Tweak,Info,Shuffle,Mark

Tweak=Artist,Album,Genre,Year,Swap,Cancel

your lines:
PopUp0=Tweak,Info,Shuffle,Mark
Tweak=Artist,Album,Genre,Year,Swap,Cancel

should be:
PopUp0=PopUp1,Info,Shuffle,Mark
PopUp1=Artist,Album,Genre,Year,Swap,Cancel

This must have changed then because it worked fine in v154. The line in the [hijack] section is supposed to substitute PopUp1 with Tweak

What Mark said here is that the ir_translate section is read before the hijack to prevent the renaming from affecting the translations..

Er um... Hmm. This worked in v154 and it doesn't in v158 so something changed... I'm sure Mark will be overjoyed to explain it to us.

In any event, changing it worked.

Already explained elsewhere.. it was a bug that it happened to work by accident in the early versions.. Note that if you actually tried it after a power-off in the early version, it would NOT work.

-ml

OK.

Yeah, couple've goofs in the sprintf() formatting..

v159 will be out shortly with fixes.

Cheers

-ml

Instead of "waiting for details to time out", just hit the knob again.. "Details" cancels "Details", so does the bottom button on the front panel (I think).

-ml

I have V158 of hijack on my mk2 Empeg, while testing the mp3 streaming to winamp [which works well] after I'd played a few songs (and I had closed winamp) -
Then I tried another song (and I hit the stop button in winamp after it had restarted itself) and within a few seconds of a song starting playing.

Then any song I tried to play from them on via the http interface would stop streaming at the same few seconds point where the song I stopped stopped playing.

Once I rebooted the empeg, problem went away again.
[variable not reinitialised properly or at all?].

Not sure if the problem is a bad error code returned from Winamp or what. The Winamp I'm using is 2.78

[Edit]
Try as I might I can't reproduce it now on V158 - and now I've upgraded to V160. I assume its related to some weirdness with Winamp as I had the Moodlogic plugin enabled at the time and it popped itself up when winamp did and when I closed the plugin it must have caused Winamp to spit back a bad error code to the hijack http server causing it to serve later mp3 files to that point only]. I've no idea what the problem is. I'm not worried by it as a reboot fixed it. However it could be a potential bug in the http server that should be fixed. If needed I will try and reproduce on a later version of the kernel to see if its still there].
[/Edit]

I just noticed on my system [running hijack V160 now], that the version reported on boot up from the Empeg software
[player?] is 2.0Beta3
[the screen that appears after waving Tux which has text at the top left hand side that looks like:
empeg-car
Version 2.0 Beta3
empegcar

And has the small empeg logo on the right hand side.


I also notice that Marks kernels are now named in this format:
vXXX.hijack.v200b8.mkY.zImage
with the orange text being b8 for presumably beta 8?
[b8 was b7 a while ago].


Is the Beta3 version number in the Player software or in the kernel as a hangover from Beta 3 or what?
I assume its the player software which if it is the case is not Something that Mark [or any kernel hacker] can do much about.

That text comes from the player software. Mine says "beta 7 (internal)" as it should. I think you should make sure you really do have the beta7 version of the player installed.

I am sure I upgraded my software from B3 to B7 on or during Christmas [about 5 weeks ago now].

I also upgraded my emplode at the same time - and it reports as Beta 7a.

I could swear on a stack of bibles that I upgraded my player as well as my wifes one to beta 7 - but mine shows beta3 for the player and my wifes (correctly) shows beta 7 (internal).

Anyway. I've [re]applied 2.00 Beta 7 [it now says beta7 Internal in the player version# too].
Then I put Mark Lords latest Hijack kernel on - all seems well.

And you know what - I now get that flashing dot in the solid line when playing a tune with Info enabled - which I recall everyone commenting on when beta7 came out, but I never saw on my player - now I know why [D'uh].

If you see "bet3", then that's the player software that you have installed. You should probably upgrade to beta7. The kernel is independent of all of this.

-ml

hello Mark,

Now if found where the bug is . I had enabled in the emplode under ->File->Configure Player->Advanced the checkbox "Disable Kennwood Remote Control". And with this settings the NextSrc is really not working on MK2 and MK2a.

Hopefully you trust in my something more ....

Ahh good one. I will modify the NEXTSRC implementation to use RIO codes instead of Kenwood codes.. it will work slightly differently as a result, though, be should be fine (the Kenwood remote has more functionality than the Rio for this purpose).

-ml