I don't know if this is a bug or not. Are there meant to be three blank visuals in the list ? The visuals that I get on my unit are:

1 oscillascope
2 blank
3 l/r volume with peak
4 cube
5 thick bar no peak
6 med bar no peak
7 thick bar peak
8 med bar peak
9 thin bar peak
10 mirror thin bar
11 mirror thin bar peak
12 plasma
13 plasma
14 plasma
15 plasma
16 thick 2 colour bar peak
17 med bar
18 thin quick bar
19 blank
20 worms 1
21 worms 2
22 worms 3
23 blank

I expected to have one blank slot so that you can disable them, but what are the other blanks for ?


Number 330 in the queue...

Sometimes I get the empeg logo with Tux at position 23..

It didn't appear at all at work, but later on at home, I'd been watching one of the prolux plasma visual's (Probably 12), and on flicking through Tux was back..

Jazz
(List 112, S/N 00030, 4 gig blue)

Yeah, seems to work between running a sync on emplode and turning off, but not afterwards.
Shame, 'cos Tux is so cute...

Steve

In fact the blank visual at the end of the list is actually the empeg logo and Tux at the beginning but due to a bug in beta5 it does not appear the second time it is shown. If you set your visual to this (the blank after the snakes) and then pull the power and re-insert it you _should_ get it back. I haven't tested this though :-) It should be fixed in a future release.

The other two blank visuals are really blank - you aren't missing anything.

--
Mike Crowe
I may not be speaking on behalf of empeg above :-)