Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#79996 - 12/03/2002 22:00 Custom fascias
DarkStorm
addict

Registered: 13/04/2001
Posts: 481
Loc: Pompano Beach, Florida
Ok gang here are the pictures of my original Mark I fascia prototypes that I was talking about.
I haven't made any Mark II proto's yet but have an idea on how to do it.
I am showing these to judge potential interest for these before I invest any more time to it.
I have also included a couple of other finishes I have, of which there are 10 to 20 different ones available.

Let me know what you all think.
Here is the link

Don't forget I still have custom lenses available.

Info on them can be found here
_________________________
Steve DarkStorm Designs

Top
#79997 - 12/03/2002 22:05 Re: Custom fascias [Re: DarkStorm]
phi144
enthusiast

Registered: 15/02/2002
Posts: 314
Loc: New Hampshire, USA
Pretty Cool! I'd be interested.
_________________________
Doug

Top
#79998 - 12/03/2002 22:06 Re: Custom fascias [Re: DarkStorm]
cushman
veteran

Registered: 21/01/2002
Posts: 1380
Loc: Erie, CO
I would be interested in aftermarket facias for my mk2a but only if they had a matching handle available too. It would look too weird to have a cool facia then a handle with dimples on either side of it.

I'd only be interested in the original black plastic, though. I'm not much for the aluminum (wouldn't match my car) but it probably look cool in a TT or something.
_________________________
Mark Cushman

Top
#79999 - 12/03/2002 22:10 Re: Custom fascias [Re: cushman]
DarkStorm
addict

Registered: 13/04/2001
Posts: 481
Loc: Pompano Beach, Florida
Unfortunately you'd be left out then. I don't have the resources available to me for making metal parts.

Sorry.
_________________________
Steve DarkStorm Designs

Top
#80000 - 12/03/2002 22:11 Re: Custom fascias [Re: DarkStorm]
hybrid8
carpal tunnel

Registered: 12/11/2001
Posts: 7738
Loc: Toronto, CANADA
Phew, I had to scroll all the way to the bottom before I found my favourite one. The wide cut done in aluminum.

I like the fact that the face is thinner and allows a near-flush layering with the lense. But ideally it would also be nice to push the whole assembly forward so it would line up better with the handle. Especially on the Mk2, IMO. Obviously it can be done fairly simply by replacing the stand-offs with longer ones, but that leaves the top and side edges of the player open. Again speaking ideally, it woud be nice to have the edges of the face curved or bent back (at the same time not leaving unjoined or sharp corner seams).

Let me know if you have any aditional info to share. Hopefully this thread will inspire some new discussion about replacement faces and give you enough interested parties to try some of your current ideas.

Bruno
_________________________
Bruno
Twisted Melon : Fine Mac OS Software

Top
#80001 - 13/03/2002 00:22 Re: Custom fascias [Re: hybrid8]
justinlarsen
old hand

Registered: 31/12/2001
Posts: 1109
Loc: Petaluma, CA
ill definaitly buy one.. look for my money for tyhe clear screen.. i got an mk2 so once u get some pics of those up.. im game to buy one what do you think the price will be ball park?
_________________________
---- Justin Larsen

Top
#80002 - 13/03/2002 06:41 Re: Custom fascias [Re: justinlarsen]
fusto
addict

Registered: 27/12/2001
Posts: 504
Loc: Lummi Island, WA
ooh... custom aluminium fascias.
Tasty.
I'm in.

Z~
_________________________
...all I ask is a tall ship and a star to steer her by.

Top
#80003 - 13/03/2002 07:30 Re: Custom fascias [Re: DarkStorm]
DBALKUNJR
member

Registered: 17/12/2001
Posts: 194
I agree with Hybrid8 that as long as the screen comes flush with the front of the handle and there is a radius edge then I am in to buy one of these.
Dave
_________________________
Dave

MK2 12Gb
MK2a 60Gb

Top
#80004 - 13/03/2002 10:07 Re: Custom fascias [Re: DarkStorm]
dmob
journeyman

Registered: 03/01/2002
Posts: 62
Loc: Boston
Sounds good to me. I'd be in on one to match the silver finish of my Panansonic head unit.

Top
#80005 - 13/03/2002 11:27 Re: Custom fascias [Re: DarkStorm]
Taym
carpal tunnel

Registered: 18/06/2001
Posts: 2504
Loc: Roma, Italy
Ok, I'd be interested in the brushed aluminium nes, but for a MK2a!
_________________________
= Taym =
MK2a #040103216 * 100Gb *All/Colors* Radio * 3.0a11 * Hijack = taympeg

Top
#80006 - 13/03/2002 12:45 Re: Custom fascias [Re: DarkStorm]
zaskar
new poster

Registered: 14/01/2002
Posts: 29
Loc: Toronto, Ontario
Definitely interested in some for my MK2/Rio. Would be great if we could get those CNC aluminium faces like CruzThs and beaker were working on a few months back but seem's too costly. One question I don't see the knob anywhere is there a place for it or it is not used.

Derek

Top
#80007 - 13/03/2002 13:45 Re: Custom fascias [Re: zaskar]
Janosch
journeyman

Registered: 03/12/2000
Posts: 50
Loc: Berlin, Germany
Yeahh looking great.....i'm definitely interested in one of this nice brushed ones for my mk2a......

janosch

Top
#80008 - 13/03/2002 14:43 Re: Custom fascias [Re: zaskar]
wfaulk
carpal tunnel

Registered: 25/12/2000
Posts: 16706
Loc: Raleigh, NC US
The Mark I empegs didn't have a knob.
_________________________
Bitt Faulk

Top
#80009 - 13/03/2002 15:16 Re: Custom fascias [Re: wfaulk]
zaskar
new poster

Registered: 14/01/2002
Posts: 29
Loc: Toronto, Ontario
That explains it

Top
#80010 - 13/03/2002 20:10 Re: Custom fascias [Re: wfaulk]
hybrid8
carpal tunnel

Registered: 12/11/2001
Posts: 7738
Loc: Toronto, CANADA
Leave it up to my dumb-ass brother not to read that Steve was posting pics of MK1 fascias...

Bruno
_________________________
Bruno
Twisted Melon : Fine Mac OS Software

Top
#80011 - 13/03/2002 20:30 Re: Custom fascias [Re: hybrid8]
zaskar
new poster

Registered: 14/01/2002
Posts: 29
Loc: Toronto, Ontario
Hey shut your mouth i know it was the MK1 fascia i saw another pic of the actual one with a button.

Derek

Top
#80012 - 13/03/2002 20:36 Re: Custom fascias [Re: zaskar]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31600
Loc: Seattle, WA
"MOM! Bruno's picking on me again! Make him stop!"
_________________________
Tony Fabris

Top
#80013 - 14/03/2002 01:14 Re: Custom fascias [Re: DarkStorm]
JaBZ
addict

Registered: 08/08/2001
Posts: 452
Loc: NZ
ummmmmm, Ya count me in on a Brushed Aluminum, wide style for my MK2a

hmmmmm, can u do wide with the knob in place?
may have to make the window smaller, but keep the same style

Top
#80014 - 14/03/2002 01:26 Re: Custom fascias [Re: DarkStorm]
mrmunsell
journeyman

Registered: 09/05/2001
Posts: 75
Loc: Los Angeles, CA, USA
Hmmmm.... can the MKI handle be used on an MKII then?

I would be interested in the Wide version of this fascia for an MKIIa .... but only if there were a matching handle to go along with it that didn't have the indentions. I guess body filler could be used on the MKII handle, but then it would have to be painted to hide it.... which wouldn't match the aluminum facia (unless it was also painted I guess).

Top
#80015 - 14/03/2002 18:30 Re: Custom fascias [Re: mrmunsell]
hybrid8
carpal tunnel

Registered: 12/11/2001
Posts: 7738
Loc: Toronto, CANADA
Use a dremel to sand the powder coat off the MK2a handle. It'll be plain aluminum colour then. Use an epoxy stick (two parts you mash together like play-doh) to fill the indent on the left. It'll dry white. Give it a couple of very small blasts of silver spray paint from a 1-2' distance. You won't be able divet was there. Of course after applying the epoxy and before painting you should make sure the finish is nice and smooth and the epoxy is properly feathered.

Here's a sample shot I took when I played with my first fascia.

Bruno
_________________________
Bruno
Twisted Melon : Fine Mac OS Software

Top